Products

Wooden Textile Printing Water Decoloring Agent

China Wooden Textile Printing Water Decoloring Agent, Find details about China Water Decoloring Agent, Manufacturer Decolorant from Wooden Textile Printing Water Decoloring Agent

Model NO.
CW-05
Appearance
Liquid
Type
Sewage Treatment Chemicals
Main Components
Dicyandiamide Formaldehyde Resin
Dynamic Viscosity (MPa.S,20°c)
10-500
pH (30% Water Solution)
Less Than 3
Solid Content %
50
Trademark
cleanwater
Transport Package
IBC Tank
Origin
China
HS Code
3402120000
Model NO.
CW-05
Appearance
Liquid
Type
Sewage Treatment Chemicals
Main Components
Dicyandiamide Formaldehyde Resin
Dynamic Viscosity (MPa.S,20°c)
10-500
pH (30% Water Solution)
Less Than 3
Solid Content %
50
Trademark
cleanwater
Transport Package
IBC Tank
Origin
China
HS Code
3402120000
Water Decoloring Agent CW-05

Wooden Textile Printing Water Decoloring Agent
Description
This product is a quaternary ammonium cationic polymer.

Application Field
1. It is mainly used for waste water treatment for textile, printing, dyeing, paper-making, mining, ink and so on.
2. It can be used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
3. It also can be used in the production process of paper & pulp as retention agent.


Advantage
1. Strong decolorization
2. Better COD removal ability
3. Faster sedimentation, better flocculation
4. Non-pollutional(no aluminum, chlorine, heavy metal ions etc)

Specifications
ItemCW-08
Main ComponentsDicyandiamide Formaldehyde Resin
AppearanceColorless or Light-color Sticky Liquid
Dynamic Viscosity (mpa.s,20°C)10-500
pH (30% water solution)<3
Solid content % ≥50
Note: Our product can be made upon your special request.

Application Method
1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. The pH value of the waste water should be adjusted to 7.5-9 for better result.
3. When the colority and CODcr are relatively high, it can be used with Polyaluminum Chloride, but not mixed together. In this way, the treatment cost can be lower. Whether Polyaluminum Chloride is used earlier or afterwards depends on the flocculation test and the treatment process.

Wooden Textile Printing Water Decoloring Agent
 
Package and Storage
Package: 30kg, 250kg, 1250kg IBC tank and 25000kg flexibag
Storage: It is harmless, non-flammable and non-explosive, it can not be placed in the sun.
This product will appear layer after a long-term storage, but the effect will not be affected after stirring. 
Storage Temperature: 5-30°C.
Shelf Life: One Year

Wooden Textile Printing Water Decoloring Agent
Wooden Textile Printing Water Decoloring Agent
 

You Might Also Like