Primer Less Flooring Adhesive Ms Sealant Glue

China Primer Less Flooring Adhesive Ms Sealant Glue, Find details about China Floor Polyurethane Sealant, Flooring Adhesive from Primer Less Flooring Adhesive Ms Sealant Glue

Basic Info.

Model NO.

DM233FC

Characteristic

Waterproof

Promoter Composition

Filler

Composition

Inorganic Material

Color

Beige, White, Grey

OEM

Available

Trademark

Transport Package

310ml Aluminum Cartridge, 600ml Sausage

Origin

China

HS Code

3214109000

Model NO.

DM233FC

Characteristic

Waterproof

Promoter Composition

Filler

Composition

Inorganic Material

Color

Beige, White, Grey

OEM

Available

Trademark

Transport Package

310ml Aluminum Cartridge, 600ml Sausage

Origin

China

HS Code

3214109000

Product Desciption

DM-flex 233FC Flooring polyurethane adhesive

Substrate: PU polymer
DM-flex 233FC is a one-component, solvent-free, fast-curing elastic binder for bonding wood floor, based on PU polymers, moisture curing type. The curing speed of mortar is related to the temperature and humidity of the environment. Under high-temperature or high-humidity conditions, it will be quickly crusted. Low-temperature and low-humidity will delay the curing process. The final curing time is also related to the thickness of the glue applied.

DM-flex 233FC is a special adhesive for flooring project, with moderate modulus, good thixotropy, moderate elongation, good elasticity, suitable for all kinds of porous and non-porous materials, with good adhesion, surface coating paint is available. It is a professional adhesive that is specially used for interior decoration.

Features & Advantages

White, grey, beige colors available, other colors can be customized.
Solvent-free.
Odorless, low VOC, PVC free, safe to use.
Good resistance to cold and hot weather alternation, over 10 years of service life.
After curing, the shrinkage rate is very low, and the Thixotropy is good, the form during construction can be maintained well.
It can be applied for the sealing of all kinds of interior decoration materials in the room.
Low temperature resistance, in the range of -40 ºC ~ 90 ºC, can maintain good flexibility and adhesion.
No primer required.

Typical applications
DM-flex 233FC is suitable for solid wood, engineering wood flooring (batten, strip, plank, veneer and wood board, etc), parquet, industrial wood flooring, veneer and cardboard, the elastic sealing of most substrate joints, including stainless steel, aluminum, copper, PVC, polyester, ceramics, wood, coating, etc. It is widely used for the sealing of kinds of floors in interior decoration and waterproof treatment.

Application tips

The bonded surface must be clean, dry and free of putty before bonding.
Substrates that may seep out of oil are not suitable for direct application of sealant.
For rusted or corroded metal surfaces (such as aluminum oxide, copper, iron oxide rust surface), in order to ensure the bonding effect, the rust on the surface layer needs to be worn off before coating.
Due to the construction environment, construction methods, and material differences, pre-testing is required before use to ensure adhesion performance.
The optimal coating temperature is +15 ~ +40°C. When the temperature is low, the extrusion resistance increases, warm up the adhesive before use.

Primer Less Flooring Adhesive Ms Sealant Glue

Technical Data Sheet

Indicator	Parameter
Color	White, Grey, Beige, etc
Outer appearance	Paste
Density, g/cm³ (GB/T13477)	1.30±0.03
Hardness, Shore A (GB/T531)	40±2
Surface dry time, min (GB/T528)	40-60min
Curing speed, mm/24h	3.0mm/24h
Elongation tensile strength (GB/T528)	App.1.5Mpa
Elongation at break, % (GB/T528)	≥450%
Tearing strength, N/mm (GB/T529)	≥7N/mm
Temperature tolerance	-40 °C ~+ 90 °C
Application temperature	+ 5 °C ~ + 40 °C
Glass-transition temperature	App. -45°C