Accumulator Die Head 10L 20L 30L Barrel Drum HDPE Plastic Blow Molding Machine Supplier

China Accumulator Die Head 10L 20L 30L Barrel Drum HDPE Plastic Blow Molding Machine Supplier, Find details about China Plastic Blow Molding Machine, Barrel Making Machine from Accumulator Die Head 10L 20L 30L Barrel Drum HDPE Plastic Blow Molding Machine Supplier

Basic Info.

Model NO.

LWB80N

Trademark

Longways

Origin

Zhangjiagang

HS Code

8477301000

Model NO.

LWB80N

Trademark

Longways

Origin

Zhangjiagang

HS Code

8477301000

Product Desciption

The Automatic plastic HDPE open head 30L barrel blow molding machine is used to make abs car hollow products , A wide variety of materials can be used for the machine, which are suitable for producing 10-30L PE bottle. Extrusion system using a hard gear reducer and inverter. The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.

Blow molding machine parameter

Item	Code item	Parameter	Note
Extruder (Main extruder )	Max capacity	30L
	Main screw	Ø100mm	High efficiency mixing
	Screw L/D	25-30
	Screw material		38CrMoALA
	Max.Extruder consumption	110KG/hr
	Twisting transition method	Electrical machinery,Gear box,AC motor	Hard gear surface decelerator with AC regulator
	Driving motor	30KW
	Screw rotate speed	60-90r/min
	Ahead/back adjusting	Yes
	Up/ down adjusting	Yes
	Temperature control zone	5
	Heating power	22kw
	Cooling for blower	5
	Cooling function	Yes	Cooling water
Clamping unit (Mold openiing/closing unit)	Structure		With three bar timing clamping structure in high speed and high force,to achieve quality products
	Clamping directions	Linear guide	For high precise location for longer service life
	Platen dimension	750*850mm	(W*H)
	Max.mold dimension	700*650mm	(W*H)
	Platen distance	450-1000mm	Min.-Max.
	Clamping force	230KN
	Mold thickness stroke	610-750mm
	Fixing pattern of mold	Mold press platen
	Mold open/close stroke control	Inducing Switch +moving	Discriminate mold opening/closing end,mold opening/closing slow speed
	Light Electric Safety protect		Taiwan
Die head	Form	Accumulator	First in ,First out
	Material		38CrMoALA,inner mirror treatment
	Accumulator volume	3.5 L
	Output of injecting	2.6 kg	HDPE,5502
	Max die-pin diameter	350 mm
	Heating Method		Stainless steel heating ring,precision +1%
	Temperature control zone	4
	Blow-air	Yes
	Adjusting of parison thickness	Yes	MOOG OR GEFRAN
	Adjusting method of thickness	Inner mold adjusting+5mm