Company Introduction

Located in Zhangjiagang City of Suzhou, the Yangtze River Delta, our company has 50million RMB fixed assets, covers an area of 30,000 square meters, with a more than 30 professionals team to design and develop, is a key professional enterprise, which integrates development, research, design, manufacture, technology service and marketing, to manufacture complete sets of wine, beverage and sticky filling equipments.
We are adhering to the principle of "market-oriented, quality as the main line, service as the guarantee and repute as the basis". HY-Filling follows ISO9001:2000 international quality management system, it has established and improved the quality assurance system to ensure the quality and performance of the company's products. The Development department of HY-Filling, with advanced technologies, has more than 30 full-time design and development engineers. HY-Filling's technologies mainly sources from Italy, France, Germany, Switzerland and Japan; furthermore, a set of liquid filling production line with advanced technology and high starting-point has been developed combined with China's basic conditions, its high automation level achieved the one in late nineties. Department of After-sale Service of HY-Filling adheres to service goal of "Customers' needs are urgent, customers' requirements are important, customers' satisfaction is the aim", provides the services of equipment installation guidance, products testing, maintenance and spare-parts supplying, consultation, complaints, regular visit every 24 hours.
HY-Filling has a network of customers for the complete set of beverage bottling lines more than 500 which spreads 30 more domestic provinces, municipalities, autonomous regions and the United States, Britain, Japan, the Middle East, Southeast Asia, Africa, Russia, CIS, South Africa etc. Besides the production and sale of equipments, HY-Filling provides various technical services to help users design equipment layout, answer users' consultation, train users' staff and provide practical operation guidance.

Product Description

General Description

Due to the low temperature filling (4 degree), while the normal temperature is higher than in such an environment, the water in the air is easily condensed in the outer surface of the bottle, which causes inconvenience to the labeling and wrapping.

Bottle warming machine is tunnel-type spray equipment, spray water through the circulation of heat exchanger, divided to three temperature zones (which can also design more zones), to be increased to room temperature(30-35degree).


 

Main Features

1)      The machine is divided into running chains, frame, and pipeline for water circulation, steam pipeline and electric control.

2)      Working principle

3)      The inverter puts needle reducer and drives initiative square axles rotate through roller chain. The sprocket on the square axle drives the chain board of plastic to be moved, form the board organization of the chain. The in-feed bottle comes into the hot water area, and is arranged orderly, warming the bottle by hot water heated by steam.

4)      Section I is the rising temperature by hot water, the temperature controlling precision is ±2°C. When the water comes to regulated level, the water flows out of overfall. Section II is the permanent temperature of hot water. The hot water feeds into the launching trough, while the level of troughs is lower than the liquid level, the water circulation is supplied water supply. When the water comes to regulated level, the water flows out of the overfall.

5)      Section III is the spraying device of pure water, in order to keep the anhydrous mark of appearance after the cooled bottle dry.

6)      Under the automatic condition , all of pumps run automatically ,protected by low liquid level .low liquid level can postpone a certain second(it is can designed in local).

7)      No matter what it is manually or automatically controlling, the steam metering needle would work, under the condition of Trough No.1 and No.2 start-up; it shuts off up to the designed temperature ,and the steam metering needle turns off ;it turns on ,while it is lower than the designed temperature.

Our service

Installation and commissioning

After the equipments arrived buyer's workshop, the buyer should take it's place for each equipment according to the supplied layout; the seller will send the experienced technician to guide the installation and debugging and trail production, and fulfil the designed capability within the designed time. The installation, debugging and training is about 30-35 days.

Training                                                    

The seller will supply technical training to the buyer. The training is includes: equipment structure and maintenance, control and operation. After training, the technicians of the buyer will grasp relevant operation and maintenance skills, and could adjust the technologies more skilled, and can deal with all kinds of malfunction in time.

After-sales service

1) After qualified of the equipment, the seller will supply one year guarantee, control system one year guarantee, free charge for wearing parts, and other spare parts with cost price. Within guarantee period, the technicians who accepted training should strictly obey the requirements asked by the seller to operate the equipments and maintenance, to find the common malfunctions and fault clearing in time; if the technicians of the buyer couldn't solve the problems themselves, the after-sales department will supply long range guide service by phone; if relevant measurements couldn't solve the problems, the seller will send the technicians to the buyer factory, clear the fault or relevant technical problems on site, the charges will reference to the installation and debugging charges.

2) After guaranteed, the seller will supply widely favorable technical support, after-sales service for the lifetime: favorable price for the wearing parts and other spare parts.