Wood Design Embossed 2mm Thickness Dry Back Vinil Flooring PVC

China Wood Design Embossed 2mm Thickness Dry Back Vinil Flooring PVC, Find details about China PVC Flooring, Dry Back from Wood Design Embossed 2mm Thickness Dry Back Vinil Flooring PVC

Model NO.
ZT16079
Pattern
Wood Grain
Color
Single Color
Usage
Household, Commercial
Installation
Glue Down
Certificate
Ce / SGS / ISO9001/ISO14001
Trademark
Zeta floors
Transport Package
Cartons with Pallets
Specification
1219*184/914*152
Origin
China
HS Code
3918109000
Model NO.
ZT16079
Pattern
Wood Grain
Color
Single Color
Usage
Household, Commercial
Installation
Glue Down
Certificate
Ce / SGS / ISO9001/ISO14001
Trademark
Zeta floors
Transport Package
Cartons with Pallets
Specification
1219*184/914*152
Origin
China
HS Code
3918109000
Product DescriptionWood Design Embossed 2mm Thickness Dry Back Vinil Flooring PVC
Brand NameZETA Floor
Product NamePVC/Vinyl Flooring/LVT
TypeClick system/Dry back
Thickness1.5/2.0/2.5/3.0/4.0/5.0mm ect.
Wear Layer0.1~0.7mm
Base MaterialRecycle material/100% virgin material
Surface FinishUV coating
Surface TexturesDeep embossed,Handscraped,Rock embossed,Leather embossed,Smooth
SampleFlooring sample is available for testing


Plank Size: 152.4*914.4 mm           Tile Size: 304.8*609.6mm

         184.9*1219.2mm
         
228.6*1219.2mm
         190*1240mm
         152.4*1219.2mm

 Large Plank Size: 1238*225mm        XL Size: 1810*234mm

         1238*178mm
         
1238*146mm

All the floor surfaces can be produced into any sizes that listed above.

 Warranties: Lifetime Residential Wear

         Lifetime waterproof
         
Lifetime Structure
        
10 Years Commercial Wear

Installation Areas: Below,on,or Above Grade   Compliance: CARB Compliant

 Nominal sizes subject to normal manufacturing tolerances

Wood Design Embossed 2mm Thickness Dry Back Vinil Flooring PVC
Every step of process is under controlled seriously to make sure final products quality .


Wood Design Embossed 2mm Thickness Dry Back Vinil Flooring PVC
Wood Design Embossed 2mm Thickness Dry Back Vinil Flooring PVCWood Design Embossed 2mm Thickness Dry Back Vinil Flooring PVC

In-Floor Radiant Heat:

 

PVC flooring can be installed over radiant heat using the floating or glue down method.

When gluing floor,use only FNLS recommended multipurpose adhesive over manufactuer's

Recommended substrate.

 

Turn the heat off for 24 hours before, during and 24 hours after installation when installing over

Radiant heated subfloors.

 

Failure to turn the heat off may result in significantly shortened working time of the adhesive

Floor temperature must not exceed 30°C

Once the installation has been completed ,the heating system should be turned on

and increased gradually(5 degree increments) until returning to normal operating

conditions.

Failure to strictly follow adhesive manufacturer's guidelines may result in failure

And void the warranty.

Warning: Electric heating mats that are not embedded into the subfloor are not recommended for use underneath FNLS.Using electric heating mats that are not embedded and applied directly underneath FNLS could void the warranty for your floor

In case of failure. It is best to install FNLS over embedded radiant floor

Heating systems and adhere to the guidelines listed above.

Wood Design Embossed 2mm Thickness Dry Back Vinil Flooring PVC