Products

Ozone Removal Filter for Air Purifier

China Ozone Removal Filter for Air Purifier, Find details about China Ozone Filter, Air Purifier from Ozone Removal Filter for Air Purifier

Usage
Ozone Decomposition Catalyst
Effect Size
Promoter Catalysts
Manufacturing Method
Spray Dry Method
Application Industry
Industry
Trademark
Xintan
Transport Package
Carton
Specification
150*150*50mm or customize
Origin
Hunan
HS Code
3815900000
Usage
Ozone Decomposition Catalyst
Effect Size
Promoter Catalysts
Manufacturing Method
Spray Dry Method
Application Industry
Industry
Trademark
Xintan
Transport Package
Carton
Specification
150*150*50mm or customize
Origin
Hunan
HS Code
3815900000
1) Brief introduction
Our ozone removal filter adopts unique nano technology and inorganic non-metallic material formula. With the carrier of aluminum honeycomb, the surface is saturated with active ingredients; It can quickly and efficiently decompose medium and low concentration ozone into oxygen under room temperature, without additional energy consumption and no secondary pollutants. The product features light weight, high efficiency and low wind resistance.
Ozone Removal Filter for Air Purifier



2) Reaction Equation
 When the air containing ozone enters the honeycomb catalyst, the ozone molecules collide with the nanometer active components on the surface of the honeycomb catalyst and are instantly decomposed into safe and non-toxic oxygen molecules. The whole reaction process is fast and efficient, zero agents and no energy consumption.

O3 → O2 + O*ad
O3 + O*ad → 2O2

 
Ozone Removal Filter for Air Purifier


   3)Product Parameter
    
Technical parameters and operating instructions
Model and NameXT-CAT-07(ozone decomposition catalyst with carrier of Aluminum honeycomb)
ApplicationDecompose ozone into safe, non-toxic oxygen molecules and purify the exhaust gas
AppearanceBlack honeycomb 
CarrierPorous aluminum honeycomb, microporous hexagonal length of 0.9, 1.0, 1.3, 1.5mm and other sizes
Dimension(mm)150*150*50 or 100×100×50 customize
Bulk density(g/ml)0.45~0.5
Active ingredientsManganese based nano composites
Operating temperature20 ~ 90ºC is recommended,the higher the temperature is, the better the effect is, and the effect decreases obviously when the temperature is below -10ºC.
Applicable ozone concentration≤200ppm
Decomposition efficiency≥97%(Final result be different according to actual working conditions)
GHSV(h-1)1000-150000
Air pressure dropIn the case of 0.8m/s wind speed and 50MM height, it is 30Pa
Service lifeOne year
Service conditions1,The height to diameter ratio of catalyst bed is 1:1, and the greater the height to diameter ratio, the better the effect.
2,This product is suitable for gas treatment with ozone concentration less than 200ppm 
3,Wind speed is not higher than 2.5 m/s, the lower the wind speed, the better.
3) Efficiency
     

4) Application
    1,All kinds of central ventilation system ,air purifiers, disinfection cabinets, copiers, printers,etc
    2,Treatment of low concentration ozone tail gas in the process of ozone oxidation wastewater
    3,Medical equipment like  treatment equipment,sterilization and disinfection, ozone pollution purification after odor elimination in public places,
    4,Ozone purification using ozone in industrial processes or in equipment or places that produce ozone
    
Ozone Removal Filter for Air Purifier
Ozone Removal Filter for Air Purifier
Ozone Removal Filter for Air Purifier


5)Method of application

    The ozone removal filter is installed in the gas path containing ozone, so that the honeycomb hole is in the same direction with the air flow, to ensure that all gas passes through the catalyst and no air leakage.

6) Package 
    Air bubble film into carton.
     
Ozone Removal Filter for Air Purifier
Ozone Removal Filter for Air Purifier


6)Remark
       1,The optimal reaction temperature is 20ºC-90ºC, lower than 10ºC may reduce the efficiency of the catalyst;Proper heating helps to improve the efficiency of the catalyst.
       2,It is recommended that the humidity of the working environment be lower than 60%. The high humidity working environment will reduce the use effect of the catalyst and shorten the service life.A dehumidifier can be added to the front section of the honeycomb catalyst.
      3,When the catalyst is used for a certain period of time, its activity will decline due to the accumulation of moisture absorption. The catalyst can be taken out and placed in the 120ºC oven for 8-10 hours (in case of lack of conditions, it can be taken out and exposed to the strong sun), which can partially restore the performance and reuse it; 
      4,If it's stored for a long term, pay attention to avoid water, dust, sealed, dry storage at room temperature.



 

You Might Also Like