Weight Loss Lipo Lab Fat Dissolving Lipolytic Solution Dermal Filler

China Weight Loss Lipo Lab Fat Dissolving Lipolytic Solution Dermal Filler, Find details about China Weight Loss, Fat Dissolving from Weight Loss Lipo Lab Fat Dissolving Lipolytic Solution Dermal Filler

Model NO.
Lipolysis
Ingredient
Lecithin, L-Carnitine, Phosphatidyl
Gender
Female
Brand Name
Hyamely
Function
Promote Fatty Decomposition
Storage
Room Temperature
Usage
Slimming
Product Name
Lipolytic Solution
Key Words
Dermal Filler
Trademark
HYAMELY
Transport Package
Box
Specification
10ml
Origin
China
Model NO.
Lipolysis
Ingredient
Lecithin, L-Carnitine, Phosphatidyl
Gender
Female
Brand Name
Hyamely
Function
Promote Fatty Decomposition
Storage
Room Temperature
Usage
Slimming
Product Name
Lipolytic Solution
Key Words
Dermal Filler
Trademark
HYAMELY
Transport Package
Box
Specification
10ml
Origin
China
Product Description


A new generation of fat-dissolving essence, specifically for fat-dissolving, is different from traditional fat-dissolving needles, it improves the shortcomings of traditional fat-dissolving needles that are easy to red, easy to swell, and slow to take effect! It has high safety, quick effect and low side effects. It has been approved by the Korean KFDA. After use, there is no adverse reaction, and the effect can be seen in a few hours as soon as possible!
 

Weight Loss Lipo Lab Fat Dissolving Lipolytic Solution Dermal Filler
Being overweight or obese has a serious impact on health. Too much fat can lead to a variety of serious health consequences. First, it will affect the image of a person. Second, it will cause musculoskeletal diseases such as cardiovascular disease (mainly heart disease and stroke), type 2 diabetes, osteoarthritis, and some cancer.


Introduction of main ingredients:
 

Lecithin has the effect of emulsifying and decomposing oils, can improve blood circulation, improve serum lipids, remove peroxides, reduce blood cholesterol and neutral fat content, reduce the retention time of fat on the inner wall of blood vessels, and promote atherosclerotic plaques Dissipate, prevent vascular intimal damage caused by cholesterol

L-carnitine is an excellent weight-loss active substance and a normal component of the diet. Its main function is to help long-chain fatty acids to carry out the β-oxidation of fatty acids, which is conducive to the use of fat by the body and the use of fat by the body, including burning excess The fat is used for energy, and has no side effects on the body
 
Phospholipids can decompose high blood lipids and high cholesterol, clean blood vessels, and make blood vessels circulate smoothly. They are recognized as "vascular scavengers".

Phospholipids can also emulsify neutral fat and cholesterol deposited in blood vessels into harmless microparticles, which are dissolved in water and excreted from the body. At the same time, it prevents excess fat from depositing on the blood vessel wall and relieves the pressure on the cardiovascular and cerebrovascular walls.

 
Detailed Photos

Weight Loss Lipo Lab Fat Dissolving Lipolytic Solution Dermal Filler
 
Product Parameters
 

 


Place of Origin
China

Model Number
10ml/vial

Use
Body

Ingredient
Lecithin, L-carnitine, phosphatidyl

Gender
Female

Form
Liquid

Feature
Promote Fatty Decomposition

Product Name
Lipolytic Solution

Function
Promote Fatty Decomposition

Key Words
Dermal Filler

Storage
Room termperature

Usage
Silimming
 
Injection Dose


Face injection volume and injection distance

Only two parts can be hit: the face and double chin. The rest cannot be operated. The highest measurement for all positions of the
face at a time is 1 box/5 pieces

The measurement given below is the amount of fat, which should be appropriately reduced according to your own situation.

20-30ml (2-3 bottles) for cheek, 10-15ml (1-1.5 bottles) on one side of cheek

 
Double chin 20ml once (2 bottles), 10ml on one side of double chin (1 bottle)

Draw a total of 20 points from time to time, each point is separated by one centimeter. Pinch the shoulder with your hand and
insert the needle vertically. The depth is 4mm. It cannot be deep or shallow, otherwise it will affect the effect. Each point is
0.5ml-1ml. , There is a scale on the needle, and the speed cannot be too fast when pushing the medicine, otherwise it will be
dizzy. It is recommended that the customer do not have an empty stomach before dissolving the fat, and press with a cotton pad
after the needle is removed, so as not to flow out and cause waste.

Body injection volume and injection interval

Part of the body 20 to 40 ml at a time (the injection measurement is shown in the figure)

Maximum injection volume: a single injection of the entire body including the face cannot exceed (10 vials/2 boxes)

The body injection is about 1-2cm apart, 1.5-2ml at each point.

If it is fat on the back calf, the depth of the needle tip is 5mm, and the maximum is not more than 6mm.

If it's the abdomen, thigh, the needle tip is 6mm. No more than 8mm at most, because the fat is thick in these two places

The above data is not absolute, you can adjust it according to your own situation.

 
Weight Loss Lipo Lab Fat Dissolving Lipolytic Solution Dermal Filler


Injection method:

Facial injection: Use a 4mm needle to vertically pinch the skin, point injections, without any assistance, each point 0.2~0.5ml hits the fat layer, it doesn't matter if it hits the muscles, only 1 piece is needed each time on the face. Massage gently after the injection and it will not swell

Body injection: The depth of the needle is about 4 to 6 mm. The depth is determined according to the location. Do not inject too deep (don't pierce the 13mm needle to the end). The effect of hitting the upper layer of fat is the best. The nerves will be swollen, hard and painful if they hit the nerves deeply. So we can also use the full-ton needle fan-shaped method, the small face needle must be correctly hit to the fat layer, the effect is absolutely great.

 

Effection
 
Weight Loss Lipo Lab Fat Dissolving Lipolytic Solution Dermal Filler
Weight Loss Lipo Lab Fat Dissolving Lipolytic Solution Dermal Filler

Precautions after injection

1. Within 24 hours after the fat-dissolving needle is injected, the injection site should not be stained with water or pollution, do not use cosmetics, and do not exercise vigorously.

2. Do not drink alcohol, do not eat irritating foods, peppers, seafood, etc. within one week after the injection. Pay attention to normal diet, do not overeating, do not eat foods with fatty polysaccharides, and strengthen exercise to enhance physical fitness.

3. The onset time after injection is 3-14 days, it will gradually lose weight within 1-3 months, and it will stabilize in 3 months. (According to different products, the effective time is also different)

4. Do not apply topical drugs or other irritating substances to the injection site and the surrounding areas of the injection 72 hours after the injection.

 
Related Products

 

 

Packaging & Shipping

 

Weight Loss Lipo Lab Fat Dissolving Lipolytic Solution Dermal Filler
Company Profile

Weight Loss Lipo Lab Fat Dissolving Lipolytic Solution Dermal Filler
Skinject is a professional company mainly deal with dermal filler injection and hyaluron pen.As we age, our skin loses fat,
collagen, and other important elements that provide facial volume and support. We also start to see the formation of lines,
wrinkles and folds that can contribute to us looking older. Dermal fillers such as Skinject can give instant and natural results
to combat these signs of ageing.

Skinject is a range of products for facial aesthetic treatments to efficiently reduce lines, folds and wrinkles, create fuller
lips, enhance contours and facial volume, as well as improve skin quality, structure and elasticity. The Skinject range is
designed to complement the varying stages of facial ageing to provide natural-looking results.



1. who are we?
We are based in Shandong, China, start from 2018,sell to North America(55.00%),Eastern Europe(10.00%),Western Europe(8.00%),Africa(8.00%),Southern Europe(7.00%),Northern Europe(6.00%),Mid East(4.00%),South America(2.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
HA Dermal Filler,Hyaluronic Acid,Dermal Filler Injection,Hayluron Pen,Mask

4. why should you buy from us not from other suppliers?
With rich export experience, the factory has advanced production equipment to ensure the quality of the products.

5. what services can we provide?
Accepted Delivery Terms: FOB,EXW,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,MoneyGram,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese,Spanish,German,French,Russian,Italian