Product Description
Plastic film granulator is used to granulate the thermal plastic films, PET fibres, whose thickness is less than 2 mm into small ganules & pellets directly. The soft PVC, LDPE, HDPE, PS, PP, foam PS, PET fibres and other thermoplastics are suitable for it.
When the waste plastic is supplied into the chamber of such machine, it will be cut into smaller chips due to the crushing function of the rotating knife and fixed knife. During the crushing processing, the material that soaked up lots heat from the frictional movement of material being crushing and the wall of container will be going to become semi-plasticizing state. The particles will stick with each other due to the function of plasticization. Before it sticks each other completely, the cold water pre-prepared is sprayed into the material being crushed. The water will be evaporated off quickly and the surface temperature of material being crushed drop down quickly also. So the material being crushed will become small particles or granules. It is easy to recognize the particles by different size and can be colored by using of color agent being putted into the container during the crushing processing.
The particles can be used for extrusion or injection mould machine directly. Also can be further pelletized for some advanced requirements.
Model of film agglomerator:
Spec Model |
GHX100 |
GHX200 |
GHX300 |
GHX500 |
GHX600 |
GHX800 |
Barrel Volume(L) |
100 |
200 |
300 |
500 |
600 |
800 |
Effective volume(L) |
75 |
150 |
225 |
375 |
450 |
600 |
Capacity(kg/h) |
100 |
150 |
200 |
300 |
400 |
550 |
Material of barrel |
Stainless steel |
Blade material |
9CrSi, 62CrMo |
We have the certification ISO9001: 2000 and we are working hard to get the CE certification. So the quality of our products are reliable.
Our Services
1.We supply one year guarantee for all of our machines.
2.We free supply 2 years normal spare parts for all of our machines.
3.24 hours service.
5.After service is full life of machine.
All of our machines design and produce according to the CE standard.
When the machines are ready,our workshop director will run and check first,if it is ok,then
our QC department will testing it again to ensure the machine is runing and working well.
Then we will send the testing report to client for confirmation.
Our principle: only after testing, machine can leave the factory. and only qualified, it can be delivered.