Can Beverage Filling Machine <Filling Sealing 2 in 1 type>

Advantages

Our can filling machine is a device developed exclusively on the basis of digesting and absorbing domestic and international (still) pop can filling and seaming machine (sealing machines).With Filling and Sealing 2 in 1 Monoblock Drink  Filling Machine For can .It adopts the normal pressure filling principle. After it passes through the dialing wheel, the empty can will enter into the lift can supporting disc, and the filling valve is aligned with the empty can, which will rise for sealing. Meanwhile, the valve port of the filling valve is automatically opened. When the filling can will be conveyed to the sealing machine head by the hook chain. The cap will be sent onto the can mouth by the cap rises, the pressing head presses he can mouth, the sealing wheel carries out pre-sealing and then real sealing. After it is sealed, the can is pushed out by the beating head of the cap beating mechanism and then enters into the can discharging procedure.

Detail description:
 

Empty Can Depalletizer
It can replace the manual can arrangement,increase production efficiency ,it is an indispensable ideal device for middle and large sized beverage plants ,plc programmable computer automatic controller ,photo-electricity switch,over travel-limit switch and pneumatic control ,etc ,use the famous brand from germany and japan and taiwan

Can rising machine
Inline can washing machine ,it will invert the can and rinsing the water ,the water can be recycled to save the water usage by the water collect .Use the famous brand from germany and japan and taiwan

Carbonated drinks mixing machine
Carbonated beverage mixing machine structure reasonable, the mix precision is high, CO₂ mixes fully, has two times of cooling, two carbonation merits. Mainly is suitable for kinds of carbonic acid drink's mix processing, also may use in the paste drink, the fermentation drink and so on other soft drinks' mix processing.

1. Can warmer: The filling temperatuer of carbonated drink is 0-4 celcius degree, and the environment temperature is 20-30 degree, so the filled bottles will be full of water drops if they are not warmed, so the Can warming machine warms the bottles by spraying warm water from the nozzles to the outside walls of cans=s to keep the cans warm and away from water drops, and and make it convinent for labelling.

2. Cooling tunnel: This machine adopts a three section cooling water recycling cooling design. The first section uses water at 85-65 degrees; The second part is at 50-35 degrees, and the third part adopts aseptic water spray. The outlet can temperature is below 35-40 degrees.

Automatic shrink packing machine 
It is suitable for wrapping of such products as pop-top,mineral water ,bottles.beer,drinks ,working with PE film shrink tunnel to pack the goods perfectly ,the whole production process adopts the Germany advanced technology ,and the main parts are imported from international famous companies ,Capacity stable and using long-time ,it consists of seven actuating motor ,through cooperation with 7 actuating motor to form the product packed with plastic film and several bottles as a group come out from the hot shrinking packing machine

Flat conveyor
The flat conveyor length based on customer factory sizes,whole line design is based on famous brand motors and automatic lubricant system ,and with less power consumption ,and save space .

Technical parameters:

Can drink filling sealing machine 

Our Service

Installation service
When you finish the Preparation conditions,our fast and professional aftersales service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.

The sample service
1.We can send you the video of the running machine.
2.You are welcome to come to visit our factory,and see the machine running.

Customized service 
1.We can design the machines according your requirements(materil,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.

After-sales service 
1.We will delivery the machine and provide the bill of load on time to make sure you can get the machine quickly
2.When you finish the Preparation conditions,our fast and professional aftersales service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.
3. We often ask feedback and offer help to our customer whose machine have been used in their factory for some time. 
4.We provide one year warranty
5.Well-trained & experienced staff are to answer all your inquiries in English and Chinese
6 .24 hours for engineer response (all services part 5days in customer hand by Intl' courier).
7 .12 Months guarantee and life-long technical support. 
8.Your business relationship with us will be confidential to any third party.
9. Good after-sale service offered, please get back to us if you got any questions.

Quality Control
We have the single quality department,that make sure the material of the raw materials is good,and ensure the machine running smoothly.
If you want to know more information about the product,You can send an inquiry, we will solve any of your problems and send you running vedio. 

FAQ
1.How to tell us your enquiry?
You can contact us by email, phone call, fax, Instant Messenger (Trademanager, WhatsApp, Skype) and let us know your requirement.
2.Are you manufacturer or trading company ?
We are industrial manufacturer, which locates in Zhangjiagang city over 23 years .
3.Where is your factory?
Our Factory is located in Zhangjiagang City, it is very near to Shanghai and Wuxi (airplame and train both available). If you arrive at Shanghai or Wuxi, we can pick you up to visit our factory.
4. Do you have any technical supports with your Beverage Filling Machines?
Yes, We have a professional team of engineers who owned many installation, debug and training experiences abroad, are available to service machinery overseas.


We Warmly Welcome Customers All Over The World To Our Company.If You Have Interests In Our Products. Please Contact Us If You Have Any Problems.