Lithium Battery 48 Volt LiFePO4 Lithium Ion Battery Pack 10kwh for on/off Grid Solar Power System Home
China Lithium Battery 48 Volt LiFePO4 Lithium Ion Battery Pack 10kwh for on/off Grid Solar Power System Home, Find details about China Lithium Ion Battery 200ah-B for Solar Energy, 200ah-B for Solar Energy/Wind from Lithium Battery 48 Volt LiFePO4 Lithium Ion Battery Pack 10kwh for on/off Grid Solar Power System Home
Basic Info.
Model NO.
GBS-12V200Ah-B
Installation
Packaged
Rechargeable
Chargeable
Weight
26kg
Rated Capacity
200ah
Cycle Life
3000 Cycles
Trademark
GBSystem
Transport Package
Special Carton for Dangerous Goods
Specification
290*288*238mm
Origin
China
HS Code
8507600090
Model NO.
GBS-12V200Ah-B
Installation
Packaged
Rechargeable
Chargeable
Weight
26kg
Rated Capacity
200ah
Cycle Life
3000 Cycles
Trademark
GBSystem
Transport Package
Special Carton for Dangerous Goods
Specification
290*288*238mm
Origin
China
HS Code
8507600090
Product Desciption
Lithium Ion Battery
Good performance under high and low temperature;
Good safety performance;
Good cycle life time;
No pollution during manufacture.
Application:
Electric vehicle
Golf cart
Electric motorcycle
Electric boat
Electric forklift
Telecommunication
Distributed Grid Energy Storage system
Mining equipment
Solar energy storage system
Marine
Backup power
Household energy storage system
Certifications
Dimensions for 12V battery pack
L: 290mm
W:288mm
H: 238mm
Technical Specification
| Item | Specification |
| Model | GBS-LFP200Ah-B |
| Pole screw hole | 1 hole |
| Rated capacity | 200Ah |
| Nominal voltage | 3.2V |
| Internal impedance | ≤0.35mΩ |
| Standard charge rate | 0.25C |
| Fast charge rate | 1.0C |
| End of charge voltage | 3.65V |
| Standard discharge rate | 0.5C |
| Max discharge rate | 1.0C |
| Instantaneous discharge rate | 3C ( 10s ) |
| End of discharge voltage | 2.9V |
| Working temperature | -20~65ºC |
| Cycle life | 3000 cycles ( 0.5C ) |
| Weight | 6.7±0.2kg |
| Dimension | 290×66×238±2mm |
| Shell | PP |
Basic Performance
(1) Output with high magnification: Standard discharge current is 0.5C-1.0C, instant impulse discharge current is 10C for 2 seconds.
(2) Good performance under high temperature, it could work under 65°C temperature.The battery structure is safe and good.
(3) Good performance under low temperature, discharge capacity in no less than 90% of rated capacity when discharging with 1C under -20°C; no less than 70% of rated capacity with 0.33C.
(4) Good safety performance:When the pressure inside the battery is too large, the one-way safety valve will release gas and heat to make sure battery perform well. When the internal pressure reaches a certain level, the valve will be open immediately which can protect the battery from burning and explosion.
(5) Good cycle life time, the discharge capacity is still over 80% after 3000 cycle times of single cell (80%DOD).
(6) It can fast charging. It could be charged to 80% within 0.5h and charged full with 1h.
(7) Low cost.
(8) No pollution during manufacture and usage.
Matters Needing Attention
(1) Please check if spare parts are completed when open the package and read the operation manual carefully.(2) Do not make the battery Short Circuit,do not over charge and discharge.
(3) Please charge the new battery to full capacity before discharge for the first use.
(4) The battery pack is fixed with plate and strip before delivery, do not disassemble the plate and strip when using the battery.
(5) Checking the voltage of battery, normally it is 3.2V-3.3V.
(6) Fix BMS for battery pack and protect single cell to avoid over charge and over-discharge.
(7) Rivet or screw is used for battery connector.
(8) Please use copper part to connect battery packs and fix with hydraulic pressure plier. We could also provide the relevant connection which fixed with screws.
(9) The charger used should be approved by our company in order to match with our lithium batteries.
(10) It will shorten battery cycle lifetime and damage battery due to overcharge and over-discharge if not do according to the above. It won't be within our company warranty.
Requirement for safety assurance
For the sake of safety assurance, please discuss the equipment design, its system and protection circuit of Lithium-ion cell advance. And consult about the high rate current, rapid charge and special application in the same way.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......