Green 3D Geomat ( Erosion geomat) for Slope Protection
China Green 3D Geomat (Erosion geomat) for Slope Protection, Find details about China Geomat, Geonet from Green 3D Geomat (Erosion geomat) for Slope Protection
Basic Info.
Model NO.
HXGEO
Width
1-2m
Length
as Your Requirements
Service-1
Free Sample
Service-2
Technical Data Sheet
MOQ
2000sqm
Quality Warranty
24 Months
Trademark
HONGXIANG
Transport Package
Woven Geotextile as Per Roll
Origin
Shangdong Dezhou
HS Code
3926909090
Model NO.
HXGEO
Width
1-2m
Length
as Your Requirements
Service-1
Free Sample
Service-2
Technical Data Sheet
MOQ
2000sqm
Quality Warranty
24 Months
Trademark
HONGXIANG
Transport Package
Woven Geotextile as Per Roll
Origin
Shangdong Dezhou
HS Code
3926909090
Product Desciption
Description
3D Geo-mat is a synthetic erosion control mat made from a mesh of UV stabilized polymer fibres. Its multi-layered filament structure has a flat base to provide good contact with the subsurface. Its 3D structure adds stiffness and stability to the soil. 3D Geo-mat protects the soil from erosion and supports and reinforces the root zone. Once vegetated, the protection layer creates an environmentally friendly surface that can withstand heavy rains and water flows (up to 4m/sec) while increasing infiltration and reducing discharge.
Applications
The lightweight and flexible 3D Geo-mat is easy to handle and install. It can be used:
• As a substitute for concrete or stonewalls for slope protection.
• As an integrated erosion control system on steep slopes and erosion prone areas.
• To prevent erosion on river embankments, channels and flood plains.
• To re-vegetate the sides of roadways and landfill sites.
• To ensure a stable cover necessary to protect geo-membranes from UV radiation.
Installation involves:
• Shaping and compacting the sub soil to the required profile.
• Unrolling the 3D Geo-mat down the slope and fixing it in position with 150-300mm U-Pegs. U-Pegs should be spaced between 300mm and 700mm depending on the substrate to ensure that the 3D Geo-mat makes contact with the surface. Overlaps should be pegged at 100mm centres in dry applications and 300mm in wet applications.
• Anchoring the top of the embankment in spade-deep trenches and, where necessary, anchoring the edges, to prevent the 3D Geo-mat slipping on the slope and uplift.
• Longitudinal edges should be overlapped 50mm and transverse edges overlapped 150mm.
• After seeding the subsurface at a rate of 20-30g/m2 , lightly cover the 3D Geo-mat with 35mm of soil and compact it. Alternatively, a spray mulch or pre-established turf can be applied over the 3D Geo-mat.
3D Geo-mat is a synthetic erosion control mat made from a mesh of UV stabilized polymer fibres. Its multi-layered filament structure has a flat base to provide good contact with the subsurface. Its 3D structure adds stiffness and stability to the soil. 3D Geo-mat protects the soil from erosion and supports and reinforces the root zone. Once vegetated, the protection layer creates an environmentally friendly surface that can withstand heavy rains and water flows (up to 4m/sec) while increasing infiltration and reducing discharge.
Applications
The lightweight and flexible 3D Geo-mat is easy to handle and install. It can be used:
• As a substitute for concrete or stonewalls for slope protection.
• As an integrated erosion control system on steep slopes and erosion prone areas.
• To prevent erosion on river embankments, channels and flood plains.
• To re-vegetate the sides of roadways and landfill sites.
• To ensure a stable cover necessary to protect geo-membranes from UV radiation.
Installation involves:
• Shaping and compacting the sub soil to the required profile.
• Unrolling the 3D Geo-mat down the slope and fixing it in position with 150-300mm U-Pegs. U-Pegs should be spaced between 300mm and 700mm depending on the substrate to ensure that the 3D Geo-mat makes contact with the surface. Overlaps should be pegged at 100mm centres in dry applications and 300mm in wet applications.
• Anchoring the top of the embankment in spade-deep trenches and, where necessary, anchoring the edges, to prevent the 3D Geo-mat slipping on the slope and uplift.
• Longitudinal edges should be overlapped 50mm and transverse edges overlapped 150mm.
• After seeding the subsurface at a rate of 20-30g/m2 , lightly cover the 3D Geo-mat with 35mm of soil and compact it. Alternatively, a spray mulch or pre-established turf can be applied over the 3D Geo-mat.
You Might Also Like
FDA Approved Lemborexant Sleep-Wake Disorders and Insomnia D......
Dmr Digital Two-Way Radio, UHF/VHF, Compatible with Mototrbo......
Multifunctional Shr Opt/RF Hair Removel Elight Birth Mark Re......
Air Lift D2300 2300lbs Rubber Air Spring Bag for Car Truck A......
Hot Feed Rubber Extruder with Ce
Single Girder Gantry Crane with Factory Price
D2w6y Cheap Manual Home Used ABS Crank Hospital Foldaway Bed
Old Style Wooden Treasure Box with Brass Latch Woodcraft
Arena PARA Gatos for Toilet Bentonite Cat Sand Pet Supply
Women A Line Short Knee Length Tutu Tulle Prom Party Skirt
G Single Screw Progressive Cavity Pump Self-Priming Slurry P......
700ml Round Shape Spirits Vodka Whisky Brandy Glass Bottle