Basic Info.

Trademark

lansen

Origin

China

Trademark

lansen

Origin

China

Product Desciption

 Quaternary ammonium compound chloride polydadmac 

This product's technical name is Polydimethyl-Dialkelen-Ammonium Chloride/POLYDADMAC, it is cationic polymer and it can be completely dissolved in water.

PROPERTIES
The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decolouring, killing algae and removing organics. The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of pH value, between 0.5 and 1.4. This product is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water.

APPLICATION FIELD
1) Water clarification--improves influent, process and effluent water quality by reducing color, suspended solids and turbidity
2) Dissolved air flotation_result in clearer subnatants, increased float solids, and greater throughput
3) Belt filter, centrifuge, screw press dewatering_for use as the primary coagulant in dual polymer programs to increase production rates, cake solids and solids capture
4) Filtration_improve filtered water quality and plant throughput.

Grades:
PD LS 20: 20% conc., PD LS 20L: Viscosity 100-300cps, PD LS 20H: Viscosity 1600cps min., for fixing agent in paper or textile dyeing
PD LS 35: 35% conc, viscosity 200-100cps, fixing agent in textile dyeing
PD LS 41: 40% conc, viscosity 1000-3000cps, fixing agent in paper
PD LS 45: 40% conc, viscosity 2500-5000cps, fixing agent or floculant for water treatment
PD LS 49: 40% conc., viscosity 8000-13000cps, for water treatment
DADMAC monomer: 60% or 65% conc., for polydadmac production.

When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content). When used to treat different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the construction chemicals and materials in the water and the flocs can not be broken. It is better to dose the product continuously.

PACKAGE AND STORAGE
1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun.
2. It is packaged in plastic drums with each containing 125kg and 1000kg.