1. RST Valve company is a industry valves manufacturer, including Thread & Flange Ball Valves, Gate Valves, Globe Valves, Check Valves, Y Strainers in stainless steel, carbon steel, cast steel, forged steel and alloy steel.

2. Globe Valve mainly had Thead ends 200WOG Globe Valve, BS1873 Flange ends Globe Valve, DIN F1/F5 Standard Flange Globe Valve, Stainless Steel Flange ends Globe Valve, Carbon Steel Butt Welded Globe Valve, Stainless Steel Bellow Seal Globe Valve, Forged Steel A105/F316 Globe Valve, 800LB/1500LB Forged Steel Flange Globe Valve, Butt Welded CF8M Globe Valve, Pressure Sealed Flange Globe Valve, High Pressure 2500LB Flange Globe Valve, 150LB~900LB WCB Flange ends Globe Valve, Gear Operated Globe Valve, Globe Valve with Pneumatic/Electric Actuator.

Specifications:
  
 
Globe Valve Application

Globe valves are primarily used as control valves where throttling or both throttling and shut-off are required. Globe Valves can also be used for on-off service; however, because of design, a pressure drop becomes inherent. This is generally confined to on-off applications where the valve is normally closed and pressure drop is not important when the valve is open. Globe valves are uni-directional valves and normal applications will find the globe valve with the flow and pressure under the disc. GLT cast steel globe valves are commonly made in outside screw and yoke designs with full ports and heavy-duty type discs.

Manufacturing Standards 
Body and Bonnet Connection
Standard body-bonnet joints of globe valves are connected by studs and nuts and are machined as follows: 
Disc
The valve is normally supplied with the conical plug type disc. The disc rotates freely on the stem and incorporates a differential angle from that on the seat ring. This design provides the maximum assurance of shut off, is less likely to stick in the body seat, and is considered the simplest design for field repair.
 
Seat Ring
The seat ring design, normally supplied is as follows:Other design are available for request.
 
Stem
All stem are rotating, rising and designed with integral backseat features which provide an ultimate seal during packing changes.
Packing
The stem packing is designed and arranged to ensure a maximum seal along the stem during operation or while at position, thus allowing for a greater reduction in fugitive emissions. Our packings are made of Graphite(Non-asbestos).
End Connections
Our standard end connection produce valves with:
- Flange end type with Raised Face(RF), Flat Face(FF) or Ring Type Joint(RTJ) that conform to ANSI B16.5.
- Butt-welding ends(BW) that conform to ANSI B16.25.
- Threaded ends(NPT) that conform to ANSI B1.20.1, socket weld ends that conform to NASI B16.11.
- All face to face /end to end dimensions conform to ANSI B16.10
Other special end connections are supplied according to customer's requirements.
 
Operator
Standard valves come with manual operator. Gear operation can be installed if required. Other accessories such as actuators, chainwheels, locking device and many others are available to meet customer requirements.
 
Competitive Advantages:
 
1. Our products is guaranteed within 18 months after delivery.
2. We offer free sample if interest before orders.
3. Technology renovation, process improvement, structure optimization and quality improvement.
4. Excellent after-sales service system, providing timely and optimal service, which help you to win the market.
5. Convenient shipping sea port, and standard exporting carton boxes & plywood cases.
6. 100% inspection & testing before delivery.
7. Third party inspection on customer requirement.
 
 Note: All the data should be confirmed with the approved drawings of manufacturer.