Our strength of Zhejiang JMT Technology Co., Ltd  air-conditioning injection molds:
a.Their molded product surface are without burrs, the internal non-conductive impurities, the material is enhanced polypropylene.
b.All the technical requirements, the design of the corresponding mold and its main components are based on customer drawings, c.Must set the lateral classification of core pulling mechanism,

d.Must make out the main process of the mold making! 
Mold material: P20,718,718H, 2738,2316, S136 and so on, there are  a variety of materials for your choice,
Mold base: 45 #  pre-hard> 30 HRC
Cooling system: Optimize the design of the circulating water, improve production efficiency and reduce your costs
Medium-term processing: to improve the hardness, by mold quenching and tempering, mold heat treatment, etc.
Post processing: nitriding (By nitriding, the temperature is low, so it can reduce deformation, by this way, the surface of the mold has high hardness (greater than HV850) and wear resistance.
Mold lifetime: the normal life of P20 molds will not less than 500,000 times.
Method of transport: Before the shipment of mold we must will install mold lock on the mold to prevent from the mold move. And the package is hard and antirust. Air or Sea shipment.
After-sales service: Mold warranty 1 year.
Other service: We will provide customers with mold progress and take pictures mold every week.
 

 

   
  ,,,.2005,JMT Mold.,JMT Mold 200 , 42 .
   JMT Mold ., QC .,JMT Mold , ISO/TS 16949: 2009&tISO9001-2015 .
JMT.,,,..
    ,,, .,.