Specifications
1. Copper transformer
2. Solar inverter
3. With Mppt charge controller
4. Pure sine wave
5. Sample available
Solar Inverter with MPPT controller 2000W
1. Features
1. Pure sine-wave out put, can be used with different domestic appliance TV, Refrigerator, Fan, Air conditioner, Induction cooker, micro-wave oven etc.
2. Generator compatibly and external battery connection achievable.
3. Generator compatible
|
Hybrid Inverter |
|
MPPT solar controller function |
|
Rated Voltage |
12/24V DC |
|
Rated Charge current |
40A |
|
Load current |
15A |
|
Input voltage range |
15-55V DC |
|
Max. PV open circuit array voltage |
55V DC |
|
Typical idle consumption |
At idle< 10mA |
|
Overload protection(DC load) |
2.0 * Inom> 5s 1.5 * Inom> 20s 1.25 * Inom temperature controlled |
|
Bulk charge |
14.6V(default) |
29.2V(default) |
|
Floating charge |
13.4V(default) |
26.8V(default) |
|
Equalization charge |
14.0V(default) |
28.0V(default ) |
|
Over charge disconnection |
14.8V |
29.6V |
|
Over charge recovery |
13.6V |
27.2V |
|
Over discharge disconnection |
10.8V(default) |
21.6V(default ) |
|
Over discharge reconnection |
12.3V |
24.6V |
|
Temperature compensation |
13.2mV/C |
26.4mV/C |
|
Lead acid battery settings |
Adjustable |
|
NiCad battery settings |
Adjustable |
|
Load control mode |
1. Low Voltage Reconnect(LVR): Adjustable 2. Low Voltage Disconnect(LVD): Automatic disconnection 3. Reconnection: Includes warning flash before disconnect and reconnection |
|
Low voltage reconnect |
12.0-14.0Vdc |
24.0-28.0Vdc |
|
low voltage disconnet |
10.5-12.5Vdc |
21.0-25.0Vdc |
|
Ambient temperature |
0-40 ° C (full load) 40-60 ° C (de-rating) |
|
Altitude |
Operating5000m, Non-Operating 16000m |
|
Protection class |
IP21 |
|
Battery temperature sensor |
BTS-optional remote battery temperature sensor for increased charging precision |
|
Terminal size(fine/single wire) |
#8 AWG |
|
PV inverter battery priority |
|
MODEL |
1000w |
1500w |
2000w |
3000w |
|
Input Voltage Waveform |
Sinusoidal (utility or generator) |
|
Nominal Input Voltage |
230Vac |
|
Low Line Disconnect |
155Vac± 4% |
|
High Line Disconnect |
265Vac± 4% |
|
Max AC Input Voltage |
270Vrms |
|
Nominal Input Frequency |
50Hz/ 60Hz (Auto detection) |
|
Over-Load Protection |
Circuit breaker |
|
Output Short Circuit Protection |
Circuit breaker |
|
Efficiency (Line Mode) |
> 95% |
|
Transfer Switch Rating |
30A |
|
Transfer Time(Ac to Dc) |
20ms (typical) |
|
Output Voltage Waveform |
Sine wave |
|
Rated Output Power (W) |
1000W |
1500W |
1500W |
2000W |
2000W |
3000W |
3000W |
|
Power Factor |
1 |
|
Nominal Output Voltage (V) |
230Vac |
|
Output Voltage Regulation |
± 10% rms |
|
Nominal Efficiency |
> 80% |
|
Nominal DC Input Voltage |
12V |
12V |
24V |
12V |
24V |
12V |
24V |
|
Nominal Charge Current |
35A |
45A |
35A |
65A |
35A |
75A |
45A |
|
Charge Current Regulation |
± 5A |
|
Battery initial voltage |
0 – 15.7 Vdc /31.4Vdc(can operate with 0V battery) |
|
Communication: |
RJ11 (Used for factory testing. No customer interface available) |
|
Safety Certification |
CE(EN60950) |
|
EMI Classification |
EN50091-2, CLASS A |
|
Operating Temperature Range |
0° C to 40° C |
|
Storage temperature |
-15º C ~ 60º C |
|
Operation humidity |
5% to 95% |
|
Audible Noise |
60dB max |
|
Cooling |
Forced air, variable speed fan |