Angle Ruler
MED-R-XY-62
Information about Physical Therapy Equipment:
User's Guide
1. Summary
1.1 Main Purpose and Applicable Range
The product is applicable for measurement of the motion range of knees, elbows, fingers, and other joints as well as the bending degree of spines.
1.2 Executive Product Standard: enterprise standard
2. Structure and Basic Parameters
1) Overall dimensions(length×width×height)cm: 35×17×5
2) Dimensions of ball: 10 mm. Quantity: 2 pieces
3)Material: plastic
3. Application Method
3.1 Make the body in the posture which is suitable for checking.
3.2 Based on the direction to be tested, move the joints to be tested to the maximum amplitude.
3.3 Put the circular center of the angle ruler in the rotating center of the joints for positioning.
3.4 According to the demands, put the fixed arm on one limb or the longitudinal shaft along another limb. Or, when locating in the standard vertical or horizontal position, put the moveable arm on another limb or the position parallel to the longitudinal shaft of the limb.
3.5 By means of moving the angle corresponding to the small hole and red axial line on the moveable arm, read the angle of joints.
3.6 The spine angle ruler could be used for measurement of the bending degree of spines and other joints, and mobility of other joints as well.
4. Precautions
4.1 Before using angle ruler, please read the "User's Guide"; be familiar with the product function, requirements and application method.
4.2 It is forbidden to forcedly pull the moveable arm and fixed arm of the angle rule outwards, so as to prevent moveable arm becoming too relaxed.
4.3 The angle ruler could only be used for measurement of bending and stretching degree of shoulders, elbows, wrists, pelvis, knees, ankles, and other joints.
4.4 After using, put the angle ruler into the toolbox and lock it.
Welcome to contact us for more information on Rehabilitation Equipment
Medical Euiqpment

and

and

and

and





and

Why Choose MeCan
