Products

Heating Furnace Pusher

China Heating Furnace Pusher, Find details about China Induction Furnace, Scrap Steel from Heating Furnace Pusher

Trademark
Yachuang Technology
Transport Package
Wooden Case
Specification
6600× 2120× 1550mm
Origin
Fuzhou Fujian
HS Code
842790000
Trademark
Yachuang Technology
Transport Package
Wooden Case
Specification
6600× 2120× 1550mm
Origin
Fuzhou Fujian
HS Code
842790000

Heating Furnace Pusher

Located directly in front of the heating furnace outlet side, the discharge machine is used to push the billet heated in the heating furnace  onto the roller table smoothly and quickly. Pinch roller discharge machine is widely used. The ejector rod is moved by two feed rollers, and the thrust is limited by the friction between the ejector rod and the feed rollers, so the discharge machine can guarantee not overload. The ejector rod is usually clamped by the spring pressed by the pressed bolt through the feed rollers. The ejector rod moves in the guide slot, and water cools the rod. The feed rollers are driven by motor through reducer and is widely used in the steeling rolling workshop.

Heating Furnace Pusher

Heating Furnace Pusher

1.Frame
The frame is an important part of the working frame, which bears up and down tension and has high strength and rigidity.
2.Push rod
It is made of seamless steel tube, and the cooling pipe is made inside to resist high temperature radiation.
3.Rail
It is welded by section steel, which is used to support the reciprocating movement of push rod.
4.Reducer
Cylindrical straight gear reducer, high torque, high frequency heat treatment tooth surface, long service life.
5.Lateral movement car
The frame is welded by profile. It is a cycloid reducer with high speed. It moves smoothly and reliably.
6.Electrical control system
Accurate control operation, stable start, ensure safe operation.

Heating Furnace Pusher

You Might Also Like