3.0 Farad Capacitor
Tips:   After you install it, the voltage shows 11 to 13.8V range is normal...

1. In order to achieve the best results, the capacitor should be installed as close as possible to the power amplifier, try to use a shorter power cord connection,At the same time the capacitor is installed in hard-to-reach places, to a certain extent, with the heat generated by the amplifier isolated.

2. As long as the power cord is short, it is recommended to use a dedicated cable distributor to connect the battery circuit. Do not install the fuse in

Between capacitor and power amplifier. However, be sure to use appropriate fuses on the main supply cables of the battery to protect the supply lines.

3. The negative connection of the capacitor should be as short as possible and be connected directly to the bare metal cable of the vehicle chassis. Do not leave the capacitor negative

Very directly connected to the power amplifier negative terminal or negative line.

4. The capacitor power cable should have the same GA number as the power amplifier power cable. It is recommended to use a high performance 8 or 10 AWG OFC cable.

5. If the capacitor is with control line, use 18 ~ 20AWG main power line to connect the power amplifier control line. Connect one end of the control cable to the car stereo's auto antenna connector.

Car amplifier installed car Please note: For your car, please install the car amplifier, then the amplifier power

A series of Farah capacitors, better for car audio system to play well.

After the installation, the car audio system, the capacitor plays to provide more power to the power amplifier, especially the low frequency burst, the stable voltage, the other more explosive sound. This is the perfect sound.

 If you do not install the capacitor, I think some owners will encounter low-frequency burst, the car lights flickering. This time you should think of it is power, yes, this is the role of capacitors