Main features

1.Cone crusher has the characteristics of large breaking force, high efficiency, high crushing capacity, low operating cost and long service life. It is convenient to operate and is economical.

2. The crushed materials are of equal size, thus reducing circulating load.

3. Large and medium-sized crushers adopt hydraulic chamber-cleaning systems, which will help reduce the down time.
4. Cone crushers with different chambers are available, to meet our customers' requirements.

5. Grease seal can effectively avoid the blockage of water feeding system and drainage system, as well as mixing of water and oil. 

6. As the overload protection device, spring safety device allows foreign matter and iron pieces to pass through the crushing chamber without jeopardizing machines.



Working principle

1. When cone crusher is working, motor drives the eccentric sleeve to rotate. The eccentric sleeve drives the transmission shaft and cone part to make swing movement. When they swing to the extent that the surface of the crushing wall is close to the roll mortar wall, the rocks and ores are pressed and crushed. 

2. Joint between supporting sleeve and frame is compressed by spring. When metal block and other materials that can no be crushed fall into the crusher, spring will be out of sharp and discharge the objects. 

3. When the materials that can not be crushed pass through the crushing chamber or the machine overloads, the spring safety system makes the cone discharging hole become larger. When objects are discharged from crushing chamber, discharging hole will automatically reset. Cone crusher resumes normal operations.

4. The surface of crushing chamber is covered with wear-resisting high manganese steel lining plate. Size of discharging hole can be adjusted hydraulically or manually.

Note: This specification is just as reference, any changes are subject to the products. Please fell free to contact us directly for more details about crusher machine .

Packing and delivery

(A) Pre-sale services:

Act as a good adviser and assistant of clients, enable them to get rich and generous returns on their investments.

1. Select equipment model;

2. Design and manufacture products according to clients' special requirement;

3. Train technical personnel for clients;

4. Services during the sale;

 

(B)Respect clients, devote ourselves to improving the total value of clients:

1.Pre-check and accept products ahead of delivery;

2 Help clients to draft solving plans;

3. After-sale services;

 

(C)Provide considerate services to minimize clients' worries:

1. Assist clients to prepare for the first construction scheme;

2.Install and debug the equipment;

3. Train the first-line operators;

4. Examine the equipment;

5. Take initiative to eliminate the troubles rapidly;

6. Provide perfect service;

7. Provide technical exchanges...