Waste PET Bottle Recycling Machine (MT-500E)


Introduction
Machine Photos of the plastic recycling machine for Reference







Material: Baled or loose PET bottles
Finished product size: Less than 16mm or customized
Purpose of use: Be used for 2-D, 3-D PSF, filament yarn, PET strap, PET sheet or PET film.
Remark: We can customize the recycling line according to client's requirement.


Production Process

1. Label Separation - 2. Manual Sorting - 3. Size Reduction -
4.1st Washing & Density Separation - 5.1st Friction Washing -
6. Hot Washing - 7.2ND Friction Washing - 8.2ND Washing & Density Separation
- 9. Moisture Removal - 10. Product Collecting


Technical Data

Model: MT-500 Economical Type
Capacity: >500 KG Per Hour
Installed power: 129.1KW+60KW
Steam use: Optional
Water supply: 3-5 Ton Per Hour
Manpower: 6-8 Person
Estimated line size (length*width*height): 59m*4m*3.5m


Main Machines & Function

Label Remover(Dry Type)
Δ Used to scrapping the labels from the plastic bottles by high speed blades
Δ Working without water
Δ Label separation rate: >95% (for round bottle)

Manual Sorting Table
Δ Used to sorting out different color bottles and PVC bottles, removing the remain labels from bottles manually

Plastic Crusher
Δ Size reduction of the material into flakes
Δ V-shape rotor design for high efficiency
Δ Capacity: 500-600 kg per hour (screen size: 18mm)

Hot Washing Tank
Δ Used to washing PET flakes by hot & chemical water, removing glue and greasy dirt
Δ Heating by electricity or customized
Δ Tank outside with heating protecting layer made of rockwool
Δ Specially designed for PET recycling

Friction Washer
Δ Used to scrubbing the flakes by high speed blades to remove the dirt and water
Δ Rotary speed: 800rpm for high efficiency

Sink-Float Tank
Δ Used to cleaning the flakes, floating out the dirt and chemical water
Δ Conveying the flakes to next process by screw on the bottom
Δ Economical design for PET recycling

Vertical Dewatering Machine
Δ Used for removal of the moisture from the flakes by high speed blades
Δ Spinning speed: 1200rpm for high efficiency
Δ Moisture content remain: Around 2%

Hot Air Drying System
Δ Used to reducing the moisture content from flakes by hot air
Δ Heating by electricity
Δ Moisture content remain: <1%


Optional Machines

Trommel Separator
Δ Loosening bottles and screening out the dirt, sand, soil from bottles
Δ Installed in front of the label separation unit

Metal Detector
Δ Used to detecting out metal from the material, separating out metal manually

Zigzag Label & Dust Separator
Δ Used to separating label scraps and fine dust from the finished product by air for higher quality product
Δ Installed in front of the collecting silo