Edge banding machine
| Specification | |
Width of board | Min. 50mm | End trimming motor | 0.5kw*2 |
Length of board | Min. 100mm | Rough trimming motor | 0.75kw*2 |
Thickness of board | 10-60mm | Fine trimming motor | 0.75kw*2 |
Width of banding | 12-65mm | Corner rounding motor | 0.5kw*2 |
Thickness of banding | 0.4-3mm | Polishing motor | 0.37kw*2 |
Heating power | 1.7kw | Feeding speed | 10-23m/min |
Feeding motor power | 3.7kw | Air pressure | 0.8Mpa |
Pre-milling moter | 2.2kw*1 | Shape of workpiece | straight |
Glue spreading motor | 0.75kw | N.W. | 2800kg |
Voltage | 380v, 3ph, 50hz | Size | 6700×850×1520mm |
Advantages: Precise band clamping adjustment with pneumatic control, release your hand from manual handle.
Board preheating to get a better gluing effect.
Nonstick material glue pot, easy to clean without residue.
High quality SWC brand bearings imported from Germany
Four Irregular cylindrical pinch rollers can entirely press the band firmly to the plate.
Automatic oiling
With Japanese SMC brand air cylinder and throttle valve, it can work with a stable pressure and a long life span. No noise when working.
Dust proof plate setting all along the whole edge banding process can prevent the board from dirt.
Auxiliary pinch roller for narrow boards. Stable edge banding even for 4cm width panel.
The use of six-edges knife for fine trimming leads to a smoother cutting surface. With the design of linear guide way, it can stably working without abrasion. Also not easy to get stuck.
Scrapping process with dust collecting pipe.
Air tank to ensure the working pressure.