Medical Instrument Professional Biological Stereo Binocular Microscope for Lab Xsp Series Ks 300e

China Medical Instrument Professional Biological Stereo Binocular Microscope for Lab Xsp Series Ks 300e, Find details about China Medical Equipment, Microscope from Medical Instrument Professional Biological Stereo Binocular Microscope for Lab Xsp Series Ks 300e

Basic Info.

Model NO.

KS 300E

Trademark

KuiShan

Origin

China

Model NO.

KS 300E

Trademark

KuiShan

Origin

China

Product Desciption

Guangzhou KuiShan Equipment Co., Ltd.
1.More than 5 years experience.
2. One-stop service.
3. The complete certificates and approved factory price.
4. Main Products: ECG, Ultrasound Machine, Laboratory Equipment, Ordinary Diagnosis Instrument, Patient Monitor, Operating Lamp and so on.

KS 300E Medical Instrument Professional Biological Stereo Microscope With CE XSP Series

Introduction

This instruction manual is for the Biological Microscope XSP series.To ensurs the safety and obtain optimum performance and to familiarize yourself fully with use of this microscope,we recommend that you study this manual thoroughly before operating the microscope.Retain this instruction manual in an easily accessible place near the work desk for future reference.

Operation Instruction

Insert the eyepiece into the eyepiece tube, and screw objectives into the nosepiece insequence of different magnification from low to high. Then put the specimen on the stage and secure it the position with tablet and move it to the center of stage.
Turn on the power switch and adjust the brightness form dark to bright slowly. After working, you must adjust the brightness to a little dark before you turn it off.
Observe the specimen from lower magnification objective firstly and move the specimen to the center of view field,then rotate higher magnification objective. You may use the fine focusing knob to obtain the clear image.When100X(s.oil)objective is used,you should fill up with cedarwood oil(without bubble)between the front of objective and the specimen surface. After working, it should be wiped with a few xylene immediately.
In order to obtain bright and clear image, the illumination must be adjusted. When different objective is chosen,you should adjust the iris diaphragm of the condenser and different brightness of the light.
When the lamp needs to replace,you should shut off the power switch and replace it after the lamp is cool. Note: The contact must be firmed,and the filament center should be adjusted.
If the camera or video attachment is used, you may insert the attachment into the tube of trinocular head of microscope,then adjustable tube until the image is clear enough.

Specification
Eyepieces

Category	Magnification	Diameter of view-field(mm)	Remark
Wide field eyepiece	WF10X	ф18
Wide field eyepiece

Objectives

Category	Magnification	Numerical aperture	Working distance	Remark
Achromatic objectives	4X	0.10	37.5
	10X	0.25	7.613
	40X(s)	0.65	0.632	spring
	100X(s.oil)	1.25	0.198	Spring oil

Total magnification

Objectives	tube coefficient	Total magnification
Objectives	tube coefficient	Eyepiece 10X
4X	1X	40X
10X		100X
40X		400X
100X		1000X

Mechanical tube length: 160mm
ABBE condenser, NA=1.25
Filter diameter: 32mm
Coarse/fine focal range:20mm
Stage size:X-Y:120*125mm
Longitudinal movement range: 70mm
Horizontal movement range: 30mm
lamp:LED lamp
power:AC input 110v, Amerindian standard plug.

Physical Charateristics
Size:185*270*400mm
Gross Weight:5.5KG

Product show