Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging

China Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging, Find details about China Pulley Lagging, Drum Lagging from Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging

Application
Iron Ore, Mining, Quarrying, Cement
Keyword
Diamond Groove Pulley Lagging
Function
Reduce Belt Slippage, Extend Pulley Service Life
Install
Cold Bonding, Rubber Sheet with Cn Bonding Layer
Use
Increase Coefficient Friction
Hardness
65 Shore a
Dimension
10mmx2mx10m, etc.
Abrasion Loss
100mm3
Thickness
8mm, 10mm, 12mm, 15mm, 20mm, etc.
Trademark
Jiaozuo Debon
Transport Package
Pallet
Specification
2m*10m per roll
Origin
China
HS Code
4008210000
Application
Iron Ore, Mining, Quarrying, Cement
Keyword
Diamond Groove Pulley Lagging
Function
Reduce Belt Slippage, Extend Pulley Service Life
Install
Cold Bonding, Rubber Sheet with Cn Bonding Layer
Use
Increase Coefficient Friction
Hardness
65 Shore a
Dimension
10mmx2mx10m, etc.
Abrasion Loss
100mm3
Thickness
8mm, 10mm, 12mm, 15mm, 20mm, etc.
Trademark
Jiaozuo Debon
Transport Package
Pallet
Specification
2m*10m per roll
Origin
China
HS Code
4008210000
Product Description
 
Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging

Coefficient of friction between conveyor belt and pulley is a very important factor in determining the performance of a conveyor belt on a drive.
Low coefficient of friction may cause conveyor belt slippage and lead to more wear of the belt and belt tracking problem.
Rubber pulley lagging can reduce slippage and extend service life of conveyor belt.


Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging
Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging
Technical Data of Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging:
1. hardness: 60~65 shore a durometer.
2. Density: 1.2 g/cm3
3. Tensile Strength: ≥15MPa.
4. Elongation at break: >450%.
5. Abrasion Loss: <100cm3.
6. Peeling Strength: ≥13MPa.
7. Temperature: -40 ~ 90 ºC.
 
Specification of Diamond pulley lagging:
Material: NR ,SBR, etc.
Hardness: 65 shore a or as request
Thickness: 8mm, 10mm, 12mm, 15mm, 20mm, etc.
Length: 10m, 20m, 30m, etc.

Width: 2m
with cn bonding layer adhesive rubber.

our mould is 2m width *10m length, we also accept customization.

Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging

 

Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging

Features of diamond groove pulley lagging:
1.Reduce belt slippage
2.Extend belt and pulley life
3.Available in Natural Rubber and FRAS approved rubber
4.With cn bonding layer
Diamond Pulley Lagging Rubber Sheet is generally applied to pulleys which require more fiction to the conveyor belt. The diamond grooves are more flexible when compared to plain rubber.

 
Installation:
1.Site construction operation is simple and easy to carry out
2.High bonding strength, 5-7 times than the traditional casting glue, creep resistance, no degumming.
3.High compactness, good wear resistance and elasticity, long service life.
4.Use temperature in-20-85 ºC, can run for a long time.



Related Products
 

Pulley Ceramic Lagging

ceramic lagging add significantly more friction and grip for the belt when compared to smooth ceramic lagging and rubber lagging. The dimples will press into the conveyor belt and help to drag it.

As Conveyor belts are significantly more expensive than lagging and as such belt slippage should be minimised by choosing the correct lagging for your application.
Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging

 

Replaceable rubber slide on lagging with retainer 

easy installation and replacement.
Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging

Bolt on pulley lagging
Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging


Main Products

PRODUCTS & SERVICES
* Conveyor Systems & Accessories Conveyor Belt Scrapers/Cleaners
* Conveyor Skirting Rubber / Polyurethane
* Ceramic Rubber Wear Liners
* Linings, Coatings, Insulation & Corrosion Protection
* Mill Liners
* Ceramic Rubber Pulley Lagging
* Impact Bed/bars
* Steel Cord Stripper
* Other rubber and polyurehtane products

Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging



Company Info

Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging
23 Year Manufacturer:
Jiaozuo Debon Technology Co., Ltd., whose former name is Jiaozuo Zhuoer Machinery Manufacturing Co., Ltd, founded in 1996, with 126 employees, including 35 engineers, we are manufacturer specialized in designing and manufacturing Industrial Conveyor Belt Related Products.

11 Year Exportor:
Our products have been exported to many countries: Australia, Chile, USA, Russia, UK, Canada, France, New Zealand, Jordan, South Africa, Indonesia, Thailand, Vietnam, etc., good quality have be approved by our clients.

Our company is certified to ISO 9001:2008 Quality Management System, and rubber lagging products were certified to "SAFETY CERTIFICATE OF APPROVAL FOR MINING PRODUCTS". We are ISO SGS approved manufacturer, SGS audited supplier, ISO9001 certified factory.

Our products are exported to many countries including America, Canada, Australia, Russia, Kazakhstan, Chile Southeast Asia, etc.
We also have good performance and market share in domestic market. Our customers prove the high quality and consistency.




Certificate
Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging



Contact Info
Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging
Drive Tail Drum Pulley Lagging Cold Bonding Diamond Groove Lagging