Products

Ceramic Conveyor Belt Cleaner

China Ceramic Conveyor Belt Cleaner, Find details about China Ceramic Belt Cleaner, Belt Cleaner from Ceramic Conveyor Belt Cleaner

Port: Shanghai, China
Production Capacity: 500000m/Year
Payment Terms: L/C, T/T, D/P
Various Ceramic Belt Cleaner: Various Ceramic Tip Cleaner
Transport Package: Wooden Case or Steel Crate
Specification: CE
Trademark: DHNM
Origin: Jiangsu Lianyungang
Ceramic Belt Cleaner
 
    Ceramic Belt Cleaner(Patent No. ZL 2011 2 0473551.1)is a new product from Japanese technology. It changes the working mode of the scraper type cleaner and improves the cleaning accuracy. As the conveying belt surface isn't absolutely smooth and parallel, some sticky materials will be missed by using the scraper type cleaner, our ceramic belt cleaner adopts the oblique line installation method, so that it is closely attached to the belt conveyor, and its cleaning effect is unmatched by the scraper type cleaner.

Ceramic Conveyor Belt Cleaner

Features
1,Long service life. Coal mines about 15 months, Iron ore about 10 months.
2,Ceramic cleaners are suitable for cleaning the dry, wet, powder, sticky or high temperature materials.
3,High degree of cleaning. Ceramic cleaner is installed in a special angle to sweep the redundant materials from conveyor belt.
4,Ceramic Belt Cleaner will improve system performance and reduce the cost and maintenance time, have a long service life and easy to install and replace.

    The scraper type cleaner is of complex in design, complicated to install, and has a short service life. It usually needs to be replaced once every 2-3 months. The ceramic belt cleaner consists of industrial ceramic blocks. The wear resistance is 5-10 times that of steel. The structure is simple. It can be installed on belt conveyors of various working environments. The installation time is short and the service life can be more than one year, it can greatly improve the efficiency of the belt conveyor.

Ceramic Conveyor Belt Cleaner
    The ceramic belt cleaner is installed on the head of the belt conveyor like the scraper type cleaner. One side is tightly tightened by the spring to make the working surface closely match the surface of the belt. After a long time of work, the joint will become lighter, as long as the spring is simply be adjusted, the belt cleaner will work well again. The ceramic belt cleaner can be made according to the width of the belt conveyor. Generally, the oblique way method can be adopted if the width within 1200mm. When the width is more than 1600mm, in order to improve the cleaning effect, the V shape can be used to increase the angle and improve the cleaning effect.

Technical Property

1)  Excellent cleaning capability
2)  Long service life and long cleaning power
3)  Easy to install
4)  Reduce the cost of replacement parts
5)  Reduce maintenance time and cost
6)  High performance and quality of the wear layer

Installation

1) Between the ends of the ceramics and belt, a slight space (2-3mm) is ok and the installation angle should between 10-35 degree, it depends on the diameter of the belt conveyor roller.
2) The tension of the two cables (wire rope) must be equal all the time.
3) The nuts and tension of the springs should be checked everyday during the first month of operation.

Ceramic Conveyor Belt Cleaner

 

You Might Also Like