Jjc1-150/150 Insulated Piercing Connector Live Connector

China Jjc1-150/150 Insulated Piercing Connector Live Connector, Find details about China Insulation Piercing Clamp, Power Line Connector from Jjc1-150/150 Insulated Piercing Connector Live Connector

Basic Info.

Trademark

C. LBE

Specification

JJC-95-10

Origin

Zhejiang Yueqing

Trademark

C. LBE

Specification

JJC-95-10

Origin

Zhejiang Yueqing

Product Desciption

Function&Features
JJC series insulationpiercing connector is mainly used for wire branching The applicable voltage is 10kV,1kV and less more than 1kV.lt has the following function and features:
1,Simple installation.The insulated layer of lead need,the strppde.Put the mainline and branch line into connector correctly and screw the moment nut off with a box spanner.
2,Small contact resistance and low temperature rising.The specially-made moment bolt guarantees constant piercing pressure which enable the connector to get a good electric contact without any excessive conductor damage,and guarantee the normal performance life of circuitry.
3,Sealed structrion and high surability.The internal adopts whole sealing structure and is filled with insulating heat conducting grease,which improves insulating strength and security.
4,Wide application range.lt is applicable to branch connection of copper and aluminum conductor,hetero-diametric conductor,and butt joint of isodiametric conductor,ltis also applicabletotransition branch connection of copper and aluminum insulated lead.
Application
Used for branch connection of insulated cable for building distribution system,connection of LV overhead insulated cables,branch connection of LV insulated service-entrance cable,distribution system of street light etc.
1,lnstallation and fixing main cable in traditional way.
2,Stripping outer insulator of main cable for 0.6m at partthat need part (don,t destroy insulation layer for phase).
3,Choosing branch cable(not more than 3m) whose distance is the same as electric meter box,and strip insulator at two terminals.
4,lnstalling the separstors vertically by turns(the sepatators distance is more than 10cm).

Anti-fire insulated piercing connector
1,Used for branch connection of insulated cable for architectural distribution system,connection of LV overhead insulated cable,branch connection of LV insulated service-entrance cable,distribution system of streetlight,etc.
2,Live-line worker power-cut work is allowable.
3,All parts are with flame retardant properties (960ºC through the hot wire and vertical burning test).
4,Main body of connector is made of high strength insulating material that anti mechanical change or climatic variation.
5,The screw that is equipped with fastening torque nut is anticorrosion treated,the torque nut enables the installation to be much simple,safe and quick,its constant puncturing pressure guarantees best electrical effect for the cable connection.
6,The connector is featured with property of waterproof,it is able to withstand voltage of 1kV in water without breakdown phenomenon.
7,The waterproof sealing end cap of branch line prevents water from entering into the branch connected conductor.lt can be branched on the left or right side according to the demand.
Jjc1-150/150 Insulated Piercing Connector Live Connector