Boda Slurry Pump Impeller are 100% interchangeable


Slurry Pump Impeller Material

1. B05 is a wear resistant white iron that offers excellent performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. The high wear resistance of alloy B05 is provided by the presence of hard carbides within its micro-structure. Alloy B05 is particularly suited to applications where mild corrosion resistance, as well as erosion resistance is required.

2. B07 Marten-sic white iron with moderate erosion resistance.

3. B49 is suitable for low pH corrosion duties, where erosive wear is also a problem. The alloy is particularly suitable for Flue Gas Desulphu-rization(FGD) and other corrosive applications, where the pH is less than 4. The alloy can also be used in other mildly acidic environments. B49 has an erosion resistance similar to that of Ni-Hard 1.



Welcome to contact us for more impellers details and free quote.






Slurry Pump Main parts:
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Hard metal and molded rubber impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer
seal rings back all liner joints.
• Throat Bush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.


FAQ

1. What Products does BODA pump mainly produce? 

BODA mainly Produce Slurry Pump, Gravel sand Pump, Dredging Pump, Centrifugal water pump and Spare Parts. Not only Pump parts, but also others wear casting parts if there is drawing or sample. 

2. Is BODA direct factory or trader? 

BODA own foundry workshop, Machining Workshop, and Assembly workshop. 
Welcome to visit our factory anytime. 

3. The Min MQQ

The MQQ is one pcs spare parts or one set bare pump

4. What information is required for quotes? 

If you need the spare parts, we need to know the parts Code and material. 

If you need the whole pump set, we need to know the usage? The flow, head, and SG, Corrosive or not? The more detailed the better. 

Welcome to Contact Me
Shijiazhuang Boda Industrial Pump Co.,Ltd : alisa