Smart BMS 6s 10s 13s 15s 16s 17s 80A Battery Management System for Li Ion/Lipo Battery Pack

China Smart BMS 6s 10s 13s 15s 16s 17s 80A Battery Management System for Li Ion/Lipo Battery Pack, Find details about China BMS, Battery BMS from Smart BMS 6s 10s 13s 15s 16s 17s 80A Battery Management System for Li Ion/Lipo Battery Pack

Model NO.
Daly 7S BMS
with Heat Sink
Yes
Discharge Current
80A
Application
Ebike, E-Scootor, Boat, E-Skaterboard
Series
17 Series
Trademark
Daly
Transport Package
Standard Express Packing
Origin
China
HS Code
85079090
Model NO.
Daly 7S BMS
with Heat Sink
Yes
Discharge Current
80A
Application
Ebike, E-Scootor, Boat, E-Skaterboard
Series
17 Series
Trademark
Daly
Transport Package
Standard Express Packing
Origin
China
HS Code
85079090

Smart BMS 6S 10S 13S 15S 16S 17S 80A Battery Management System for Li Ion/Lipo Battery Pack

Model: DL17S( 3.7V rated Li-ION Battery bms not for 3.2V Rated LiFePO4 bms)

common Version : common port for charge/discharge 
separate Version : separate port for charge/discharge

We can customize any PCB from 1S to 30S lithium batteries with different current.

1. Overview

DL17S60V25A 80A 100A 200A PCB is used for 17 series 60V Li-ION battery pack.

We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.

The main functions are: over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.

According to the customer request we can develop PCM in different sizes and structures.

BMS manufactured by  high quality Mos and IC imported . Keep your battery long cycle serivce life time.

2. Advantage

Use top quality (A-level) protective integrated circuit IC, from the solution of Seiko of Japan.

Strong load ability, constant discharge current 25A 35A 45A 60A, use high voltage resistance, low inner

resistance power Mosfet. The heat sink will greatly help cooling.

IC itself has power balancing function. The circuit is simple and reliable.

Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection.

function is very reliable.Long time short circuit of the load won't affect the PCB and the battery.Temperature protection during charging and discharging.

Extreme low power consumption. The consumption of the whole device is less than 50uA.

PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.
 

17S 60VDetailSpec
DischargeMaximal Continuous Discharging Current 25A35A45A60A
Peak Discharging Current75A100A180A180A
Over Current Protection Current75A100A180A180A
ChargeCharging Voltage71.4V
Charging Current25A35A45A60A
Over charge protectionOver Charge Detection Voltage 4.25±0.025V
Over Charge Detection Delay Time0.5S
Over Charger Release Voltage 4.19±0.05V
Cell balancingCell balancing Detection Voltage4.18V
Cell balancing Release Voltage4.18V
Cell balancing Current35±5mA
Over discharge protectionOver Discharge Detection Voltage2.8±0.05V
Over Discharge Detection Delay Time0.5S
Over Discharger Release Voltage3.0±0.05V
Over current protectionOver Current Detection Voltage150mV
Over Current Detection Delay Time9MS
Over Current Protection ConditionDisconnect the load
Short ProtectionDetection ConditionExterior Short Curcuit
Detection Delay Time250uS
Release ConditionDisconnect the load
Temperature Protection65ºC or 75ºCOptional
Internal ResistanceMOSPET≤10mΩ
Size25A 35A 45A (80*65*9mm)60A (80*65*12mm)

Smart BMS 6s 10s 13s 15s 16s 17s 80A Battery Management System for Li Ion/Lipo Battery Pack
Smart BMS 6s 10s 13s 15s 16s 17s 80A Battery Management System for Li Ion/Lipo Battery Pack
Smart BMS 6s 10s 13s 15s 16s 17s 80A Battery Management System for Li Ion/Lipo Battery Pack
Smart BMS 6s 10s 13s 15s 16s 17s 80A Battery Management System for Li Ion/Lipo Battery Pack

FQA
1.What is the common port and separate port? what is the difference?

We take 13S48V16A BMS as an example, common port 16A means your charge   cathode and discharge cathode are connected in the same point end(our P-),   charge cathode and discharge cathode are used in the common connection port, so the charge current and discharge current are the same 16A. while the   separate port is separately connected by charge cathode (C-) and discharge   cathode (P-),  so the charge current and discharge current are different,   discharge current 16A, charge current 8A.
 
2.What is the balance function?
The working principle and function are as followings, when your one cell voltage   is upto alarm voltage(Li-ion upto 4.18V, Life Po4 upto (3.6V), then the cell Balance   starts to work, balance resistance starts discharge with 35ma(when balance  discharge starts to work, BMS will starts a little heat up, which is the normal   reflection), the cell is in both charging and discharging status, and others which   are not reached to alarm voltage(Li-ion 4.18V, Life Po43.6V)are only in charging  status, no discharging, when the fast cell voltage is reached to alarm voltage  (Li-ion 4.25V, Life Po43.75V)BMS starts off power protection, all the other cells are all in stop of charging, this process will enable your battery charging in   balance current, and your battery voltage are in balance status, but when your   cell voltage difference are in a big range, then balance can not be functionning well.
 
3.The relationship between Battery capacity and BMS current?
There is no direct relationship between  Battery capacity and BMS current, big   capacity doesn`t mean a big battery, but rely on continue current, that is to say   if your engine is powerful, your should choose high current of BMS, it is not relied  on battery capacity.
 
4. What type of charger should  I choose?
Lithium battery must choose specific charger, do not use   Charger for Leadacid battery, for leadacid charger may have MOS with high   pressure breakdown protection, which will not protect of BMS over charge.  Life Po4 battery charger voltage=battery string No.X3.6V, while Li-ion battery   charger voltage=Battery string No.X4.2V.
 
5. What current BMS should I choose ?
Take 10S36V as an example: what current BMS you choose is relied on your   E-bicycle Motor power and current limitation of controller. eg., choose 16A for   below 350W, 25A for below500W, 35A for below 800W, 60A for Below 1000W,   higher than 1200W are contact with our service specialist for suggestions, one   inall, continue current shall be higher than current limitation in Controller.
 
6. Whether my BMS damaged?
if you want to judge if the BMS is damaged, please take the folowing steps, to   test if each cell voltage is the same with voltmeter? if the cell voltage difference   is over 1.0V, the fault is displayed that it cannot run far, no power supply at the start range, short charge time, all these issues are almost caused by battery cells,   if BMS damaged is displyed as no charge, no discharge, no discharge while the   battery has voltage.