Industrial 400 KVA Deutz Generator for Building Backup Power
Δ STANDARD CONFIGURATION
√ Powered by Industrial Deutz V type 6 cylinders water-cooled diesel engine
√ Deutz diesel engine global warranty
√ Single bearing alternator with insulation class H and IP23
√ Sstandard CHINT or DELIXI circuit breaker, ABB as an optional
√ Steel base fuel tank with anti-vibration mounting
√ Based 8-10 hours build-in fuel tank
√ Industrial 9 dB muffler exhaust system, free-maintenance battery, user's manual
√ Flexible fuel lines and lube oil/water/fuel drain cock
√ Smartgen antomatic start digital controller HGM6120U
√ Standard Shrink wrap packing method (Plywood packing box as optional)
Δ TESTING ITEMS
GENLITEC POWER provides a full line of brand new and high quality products. Each and every unit is strictly factory tested before shipment.
√ Parts faults testing
√ Fuel tank pressure testing
√ Bolt tightening torque testing
√ Painting thickness testing
√ Voltage bearing and insulation testing
√ Noise testing
√ Loading Testing(25%, 50%, 75%, 100%, 110% load to check verify that all control systems, alarm and shut-down protection)
Δ TECHNICAL DATA
| GEN-SET MODEL: GPD400(S) |
| Prime power: 400kVA | |
| AC 3-PHASE 4-WIRE, Y-CONNECTION | Voltage: 415/240V; 400/230V, 380/220V |
| Frequency: 50HZ | Rated current: 576A |
| Power factor: COSΦ=0.8 | Quality control: ISO9001 2008 |
| The regulating rate of steady voltage | ≤1% |
| The time of steady voltage | ≤1.5sec |
| The waving rate of voltage | ≤1.0% |
| The regulating rate of steady frequency | ≤3% |
| The regulating rate of instantaneous frequency | ≤±10% |
| The time of steady frequency | 3sec |
| The waving rate of frequency | ≤1% |
| Dimension (L×W×H) (mm) | 3000×1400×1700 |
| Gross weight (kg) | 3500 |
| ENGINE |
| Model | DEUTZ BF8M1015C-LAG1A |
| Rated Power: | 388KW |
| Number of Cylinders | 8 V |
| Make | Huachai |
| Cycle | Four stroke |
| Bore×Stroke(mm) | 128×140 |
| Compression Ratio: | 17.3:1 |
| Speed Governor | Electrical |
| Cooling System | Water-cooled |
| Fuel Consumption at 100% Load | 208g/kwh |
| Starting Method | Electrical starting |
| ALTERNATOR |
| Brand | STAMFORD, GENLITEC or LEROY SOMER |
| Rated power | 320KW |
| Type: | Brushless ,Self-excite, AVR automatic voltage regulating |
| Number of Phase | 3 |
| Connecting Type | 3 Phase and 4 Wires |
Δ GPD SERIES DIESEL GENERATOR SET POWER RANGE (POWERED BY DEUTZ)
50Hz
3 phase, 4 wires, 0.8PF, 1500rpm, 415-230V/240-115V
| Genset Model | Prime power | Standby power | Engine model | Dimension | Weight |
|
| KW | KVA | KW | KVA | DEUTZ | (mm) | (kg) |
| GPD60-I | 48 | 60 | 53 | 66 | BF4M2012 | 1800x600x1500 | 1000 |
| GPD75 | 60 | 75 | 66 | 83 | BF4M2012C | 1950x650x1500 | 1100 |
| GPD100 | 80 | 100 | 88 | 110 | BF4M1013EC | 2150x800x1500 | 1500 |
| GPD130 | 105 | 131 | 115 | 144 | BF4M1013FC | 2400x800x1650 | 1550 |
| GPD150-II | 120 | 150 | 132 | 165 | BF6M1013EC | 2400x800x1650 | 1600 |
| GPD188 | 150 | 188 | 165 | 207 | BF6M1013FCG2 | 2500x850x1700 | 1700 |
| GPD200 | 160 | 200 | 176 | 220 | BF6M1013FCG3 | 2550x850x1750 | 1900 |
| GPD225 | 180 | 225 | 198 | 248 | BF6M1015-LAGA | 2550x900x1750 | 1950 |
| GPD250 | 200 | 250 | 220 | 275 | BF6M1015C-LAG1A | 2700x950x1750 | 2300 |
| GPD275 | 220 | 275 | 242 | 303 | BF6M1015C-LAG2A | 2900x1000x1800 | 2500 |
| GPD313 | 250 | 313 | 275 | 344 | BF6M1015C-LAG3A | 3000x1050x1850 | 2750 |
| GPD350 | 280 | 350 | 308 | 385 | BF6M1015C-LAG4 | 3000x1100x1850 | 2800 |
| GPD375 | 300 | 375 | 330 | 413 | BF6M1015CP-LAG | 3100x1100x1850 | 2850 |
| GPD400 | 320 | 400 | 352 | 440 | BF8M1015C-LAG1A | 3300x1150x1950 | 3300 |
| GPD450 | 360 | 450 | 396 | 495 | BF8M1015C-LAG2 | 3300x1150x1950 | 3350 |
| GPD475 | 380 | 475 | 418 | 523 | BF8M1015CP-LAG1A | 3350x1150x2000 | 3400 |
| GPD500-I | 400 | 500 | 440 | 550 | BF8M1015CP-LAG2 | 3400x1200x2000 | 3450 |
| GPD500-II | 400 | 500 | 440 | 550 | BF8M1015CP-LAG3 | 3400x1200x2000 | 3450 |
| GPD525 | 420 | 525 | 462 | 578 | BF8M1015CP-LAG4 | 3450x1200x2000 | 3550 |
| GPD560 | 448 | 560 | 493 | 616 | BF8M1015CP-LAG5 | 3500x1250x2100 | 3700 |
Δ STANDARD SUPPLY SCOPE
| Exhaust silencer | Flexible pipes | Flange | Base frame | Main circuit breaker |
| Starting battery | Battery wires | Battery charger | Float battery charger | AVR |
| Cooling radiator | Wires diagram | Manual books | Auto control panel | Silent canopy |
Δ OPTIONAL PARTS
| Engine & Radiator | Alternator part | Electric part | Fuel tank part | Others |
| Water preheater | PMG | ATS | External daily fuel tank | Weatherproof canopy |
| Lub oil pre-heater | Anti-condensation heater | Synchronization panel | Automatic fuel pump | Mobile trailer |
| Spare parts | Parallel droop | ABB breaker | Oil drain pump | Containerized |
Δ COMAPNY OVERVIEW
√ Company name: Genlitec (Fuzhou) Power Equipment Co., Ltd.
√ Value: Power Anywhere Anytime...
√ Business type: Power equipment manufacturer and service provider
√ Founded: 2010 year
√ Products range: Engines, Generators, Water Pumps, Mobile Lighting Towers
√ Professional Team: Genlitec Power technicians and engineers are hard-working and serious with their work. Compliance, standard and process are fundamentals of our high quality products. Members of our products development team are rich in professional skills and familiar with products. With the help of advanced development tools and management platforms, we will always be ready to provide best service to all our customs.
Δ FAQ (FREQUENCY ASKED QUESTION)
Question: What's your warranty period?
Answer: Our payment terms is 1 year or 1000 running hours whichever comes first. But based on some special project, we can extended our warranty period.
Question: Does your generators has global warranty?
Answer: Yes, most of our products like Cummins, Perkins, Doosan power generator enjoy the global warranty service. And the alternator we use like Leroysomer, Stamford, marathon also enjoy the global warranty service, so you do not need to worry about the aftersales service.
Question: Do you accept OEM/ODM service?
Answer: Yes, we can accept OEM.
Question: What's your payment terms?
Answer: We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment or L/C at sight, L/C deferred payment terms or west union.
Question: What's your delivery time?
Answer: Our normal delivery time is 25 working days. But if your order is some special engine and alternator, then the delivery time is longer.