Products

ASTM D2265 Grease Dropping Point Apparatus for Dropping Point of Lubricating Grease Experiment

China ASTM D2265 Grease Dropping Point Apparatus for Dropping Point of Lubricating Grease Experiment, Find details about China Dropping Point Tester, Grease Dropping Point Tester from ASTM D2265 Grease Dropping Point Apparatus for Dropping Point of Lubricating Grease Experiment

Model NO.
GD-4110-I
Heating Power
700W Tube Heater
Display
LCD Display
Power Supply
220V, 50Hz
Warranty Period
1 Year
Trademark
GOLD
Transport Package
Packed in Plywood
Specification
Refer to the specifications
Origin
Chongqing of China
HS Code
9031809090
Model NO.
GD-4110-I
Heating Power
700W Tube Heater
Display
LCD Display
Power Supply
220V, 50Hz
Warranty Period
1 Year
Trademark
GOLD
Transport Package
Packed in Plywood
Specification
Refer to the specifications
Origin
Chongqing of China
HS Code
9031809090
ASTM D2265 grease dropping point apparatus for dropping point of lubricating grease experiment

 
 
Introduction:

The dropping point of a lubricating grease is an indication of the heat resistance of the grease and is the temperature at which it passes from a semi-solid to a liquid state under specific test conditions. It is dependent on the type of thickener used and the cohesiveness of the oil and thickener of a grease.

As grease temperature rises, penetration increases until the grease liquifies and the desired consistency is lost. Dropping point is the temperature at which a grease becomes a fluid enough to drip. The dropping point indicates the upper temperature limit at which a grease retains its structure, not the maximum temperature at which a grease may be used. 

 
Working condition:
  1. Environmental temperature 0~35ºC, relative humidity≤85%.
  2. The apparatus should be put on the horizontal worktable with sufficient illumination
  3. Rating voltage: AC220V±10%,frequency:50Hz±1.
  4. Grounding condition must be good.

Specifications:
 
Item NameGD-4410I ASTM D2265 grease dropping point apparatus
Aluminum block oven MaterialAlloy aluminum
Heating power700W tube heater
Grease cupmade of chrome plated brass, size according with GB/T3498-83
Test tubethin wall glass tube, size according with GB/T3498-83
Cup supportmade of heat-resistant and hard glass
Thermometeraccording with GB/T514-83,scale: -5~400ºC,minimum scale mark 1ºC
 

Features:
  1. 6 groups of samples can be tested at the same time in 6 test tube wells.
  2. Heated by aluminum block oven,same temperatures in test tube wells.
  3. Intelligent temperature control device,temperature can be set discretionarily and displayed by number.
  4. Repeatability of test result is good.
 
Real Pictures of ASTM D2265 grease dropping point apparatus:

ASTM D2265 Grease Dropping Point Apparatus for Dropping Point of Lubricating Grease Experiment





 

You Might Also Like