Galvanometer Laser Engraving Machine Fiber laser Fly Printing Machine
China Galvanometer Laser Engraving Machine Fiber laser Fly Printing Machine, Find details about China Fly Marking, Flying Laser Marker from Galvanometer Laser Engraving Machine Fiber laser Fly Printing Machine
Basic Info.
Model NO.
LM30
Laser Wavelength
Fiber Laser
Laser Classification
Solid Laser
Type
Optical Fiber Laser Marking Machine
Marking Method
Scanning Marking
Trademark
LaserMax
Transport Package
Plywood Box
Specification
57*66*155CM
Origin
China
HS Code
845611
Model NO.
LM30
Laser Wavelength
Fiber Laser
Laser Classification
Solid Laser
Type
Optical Fiber Laser Marking Machine
Marking Method
Scanning Marking
Trademark
LaserMax
Transport Package
Plywood Box
Specification
57*66*155CM
Origin
China
HS Code
845611
Product Desciption
Working principle
The laser beam from the laser (through the beam expander mirror) enters the marking head, and after the reflection of the scanning oscillator 1 and scanning oscillator 2 reaches the f-Theta flat field lens, through which the lens is focused to form a high energy spot (15-20μ) with a small area. The scanning oscillator is driven by a highly sensitive detector-type motor, and the computer control system controls these two motors to deflect at a certain angle, while controlling the laser beam off and on, finally marking the required symbols and patterns on the workpiece
Product features
1.It can process a variety of metal and non-metal materials. Especially for high hardness, high melting point and brittle materials, the marking is more advantageous.
2.Non-contact processing, no damage to the product, no tool wear, and good marking quality.
3.The laser beam is fine, the processing material consumption is small, and the processing heat affected zone is small.
4.High processing efficiency, computer control, and easy automation.
The laser beam from the laser (through the beam expander mirror) enters the marking head, and after the reflection of the scanning oscillator 1 and scanning oscillator 2 reaches the f-Theta flat field lens, through which the lens is focused to form a high energy spot (15-20μ) with a small area. The scanning oscillator is driven by a highly sensitive detector-type motor, and the computer control system controls these two motors to deflect at a certain angle, while controlling the laser beam off and on, finally marking the required symbols and patterns on the workpiece
Product features
1.It can process a variety of metal and non-metal materials. Especially for high hardness, high melting point and brittle materials, the marking is more advantageous.
2.Non-contact processing, no damage to the product, no tool wear, and good marking quality.
3.The laser beam is fine, the processing material consumption is small, and the processing heat affected zone is small.
4.High processing efficiency, computer control, and easy automation.
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover