Products

Aluminium Circles for Aluminium Saucepan 1060

China Aluminium Circles for Aluminium Saucepan 1060, Find details about China 1060 Aluminium Circles, Aluminium Circles for Aluminium Saucepan from Aluminium Circles for Aluminium Saucepan 1060

Model NO.
1060, 1050, 1100
Alloy
Alloy
Alloy No.
1060
Tempers
O, H12, H14
Thickness
0.36-10mm
Diameter
20-1200mm
Applications
Producing Cookware,Utensil,Pots,Pans,Kettles.
Trademark
signi aluminum
Transport Package
Wooden Pallet
Specification
circle
Origin
Henan China
HS Code
760611900
Model NO.
1060, 1050, 1100
Alloy
Alloy
Alloy No.
1060
Tempers
O, H12, H14
Thickness
0.36-10mm
Diameter
20-1200mm
Applications
Producing Cookware,Utensil,Pots,Pans,Kettles.
Trademark
signi aluminum
Transport Package
Wooden Pallet
Specification
circle
Origin
Henan China
HS Code
760611900
Aluminium Circles for aluminium saucepans 1060

Alloy: 1050/1060/1070/1100/3003
Thickness: 0.4-8.0mm
Diameter: 85-1250mm
End-use: Cookware, reflector, satellite

The properties of aluminum circles (or shaped blanks) make them ideal for use in a number of markets including the cookware, automotive and lighting industries:
Low anisotropy, which facilitates deep drawing
Strong mechanical properties
High and homogeneous heat diffusion
Ability to be enameled, covered by PTFE (or others), anodized
Good reflectivity
High strength-to-weight ratio
Durability and resistance to corrosion
Signi aluminum offers circles and shaped blanks in a wide range of alloys, tempers, thicknesses and diameters to meet all likely customer requirements.
Aluminium circles
The properties of aluminum circles (or shaped blanks) make them ideal for use in a number of markets including the cookware, automotive and lighting industries:
 
AlloyTemperThicknessDiameter
1050, 1060, 1070, 1100, 3003O, H12, H140.36~10mm20~1200
Remark: special specifications can be produced according to your requirement
 
Dimensions
ParameterRangeTolerance
Thickness for circles (mm)0.71 _ 6.35for 0.71 to 1.4 +/-0.08
for 1.41 to 2.5 +0.1, -0.13
for 2.51 to 4.0 +/-0.13
for 4.01 to 5.00 +/-0.15
for 5.01 to 6.35 +/-0.20
Thickness for ovals (mm)1.75 _ 3.00for 1.75 to 2.5 +0.1, -0.13
for 2.51 to 3.00 +/-0.13
Diameter (mm)102 _ 1250(a) sheared circles +2, -0
(b) punched circles +0.5, -0
Earing< 5% for ' O' temper
< 9% for H12, H14, H16, H18		 
 
Mechanical properties
Alloy (AA)Temper%E (min)
(at 50 mm gauge length)		UTS (mpa)Bend test: radius of bend
(T=material thickness)
MinMax
1050O295595close
H146951251/2T
H184125-1T
1070O2995-close
H146951201/2T
H184120-1T
3003O2590130close
H1451301801/2T
H1641501951T
H183170-3T
 
Chemical composition
Alloy (%)AA 1050AA 1070AA 1100AA 3003
Fe0.400.251.000.70
Si0.250.20(Fr + Si)0.60
Mg0.050.03--
Mn0.050.030.051.00 _ 1.50
Cu0.050.040.050.05 _ 0.20
Zn0.050.040.100.10
Ti0.030.030.050.10 (Ti + Zr)
Cr----
Each (others)0.030.030.050.05
Total (Others)--0.1250.15
Al99.5099.7099.00Remaining
 
Surface quality of aluminum circle
Free from scratches, pit marks, rolling bands
Applicable standards
ASTM - B - 209M, Aluminium association _ aluminium standards and data, Hindalco manufacturing limits (as applicable).
Packing
The circles are packed in boxes or pallets with interleave paper, polythene, foam / thermocol. Pallets and boxes are strapped with hoop iron and clips. Silica gel packets are placed in the boxes for moisture protection.
Aluminium Circles for Aluminium Saucepan 1060
Aluminium Circles for Aluminium Saucepan 1060
Aluminium Circles for Aluminium Saucepan 1060
Aluminium Circles for Aluminium Saucepan 1060
 

You Might Also Like