Machine description
Automatic Feeder and Unloading System Automatic IBC Tank Cage Spot Welding Machine 

The equipment comprises material lifting part, feeding part, bending part, docking riveting part, profiling and punching part, mechanical arm part, hydraulic system, pneumatic circuit, and electrical control and water cooling system. They can also be independent devices.

1.Grid welding machine

2. Grid lifting robot

3. Bending machine

4. Locking machine

5.Clinching&Punching machine

6. Cage bottom melting and punching machine

7.Robots
1. IBC Grid Mesh Welding Machine
    Model: DMZW-4*250Kva-1200
    Rated Power: 4*250Kva
    Input power: max. 4*36Ka
    Open Circuit Voltage:DC12.5V
    Voltage: 380V/50Hz
    Pneumatic Pressure: 0.6---0.8MPa
    Coolant Pressure: 0.15---0.3MPa
    Coolant Temperature: <30ºC   
    Coolant Flow: ≥40L
    Dimension: L: 16000mm, W: 3500mm, H: 2000mm


2.After placing the IBC grid on the trolley orderly and pushing the trolley to the corresponding position, locating magazine will be used to fix it. Then lifting part will make the mechanical arm stretch to and grab the IBC grid on the trolley. The products grabbed by the mechanical arm will be sent to the next procedure (material transporting machine) with transmission part.

3.Bending machine
IBC bending machine is applied to the bending of pallet tank meshes, and they will be bent into rectangular frames with the outline dimension of (1200±5mm)×(1000±5mm).
Fig. 3.3.1.1 is the outline dimension drawing of IBC bending machine:


Machine pictures