1.Product Description of  Hammer Crusher

Hammer crusher, also called hammer mill crusher, which is a machine used to shred orcrush materials into smaller pieces.
The basic design of this type machines involves a rotating shaft which free-swinging hammers are attached.
This assembly is enclosed by a drum which carries the material to be pulverized. A hopper is used to feed the source material into the drum. The hammers gradually crush material until it is small enough to pass through a screen with openings inaccordance with the desired particle size.






2. Working Principle of Hammer Crusher

1.Hammer Crusher mainly consists of frame, rotor, support iron and grate bars.
2.The frame is divided into two parts: Upper part and lower part which are welded by steel plates after being cut.
3.Liners made of high manganese steels within the frame can be replaced after being worn out.
4.The rotors consist of the turn plate, pin shafts, and hammers which are grouped regularly in the main shaft.
5.The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors.
6.Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size.
7.Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing.
8.The size of the final product can be adjusted by changing the grate bars.
9.The gap between the rotors and the grate bars can also be adjusted according to different requirement.

5. Working Sies Pitures

5.Company Introduction
 

7.FAQ
 

1. What is the minium order quantity?
One set.
2.How long is the warranty period?
One year. Wearing parts are excluded.
3. What is the after-service of your company?
We can provide the customers foudation drawing, installation service, work training as well as other service according to the
customer's requirements.
4.How long is the delivery time?
About 15 days after we receive the payment.
5. What are the payment terms?
T/T, L/C are the best, it can be adjustable according to different situations.--------------------------------------------------------------------------------------
Kindly Note:
1. Please pay attention to the capacity. It's what you must take into consideration in choosing a suitable machine.
2. Please Inform us the follow figures:
1). feeding material
2). Feeding material MAX. Size (mm)
3). Final mesh size (mm)
4). Capacity (t/h)
Upon we got your message we shall give you our favorable offer in short time