High Speed Balance No Dig Slurry Compound Pipe Jacking Tunnel Boring Machine Machine for Steel Pipe

China High Speed Balance No Dig Slurry Compound Pipe Jacking Tunnel Boring Machine Machine for Steel Pipe, Find details about China High Quality Pipe Jacking Machine, Pipe Jacking from High Speed Balance No Dig Slurry Compound Pipe Jacking Tunnel Boring Machine Machine for Steel Pipe

Basic Info.

Trademark

Fengda

Specification

Overall dimension: 710x2800

Origin

Tianjin, China

HS Code

8544421900

Trademark

Fengda

Specification

Overall dimension: 710x2800

Origin

Tianjin, China

HS Code

8544421900

Product Desciption

High Speed Balance No Dig Slurry Compound Pipe Jacking Tunnel Boring Machine Machine for Steel Pipe

Product Application

1. Introduction:
Remote-controlled Slurry Balance Pipe-Jacking Tunneling Machine is a new advanced non-digging-equipment with high technology.
It combines multi-disciplinary technologies in one, such as the machinery units, hydraulic system, electric controller (including PLC), Laser system, measuring device, etc.
Besides the high efficiency, it also has no effect on the traffics on surface. Furthermore, it is good for the environment, and can lower the cost of the construction.
2. Application scope:
For trenchless underground pipe laying projects, eg. sewage, water supply, discharging projects, cables, tunnel.....
3. Specifications:
-3.1 Fit in soft soil, clay, sandy soil, gravel soil, hard soil, etc. wide range of soil body.
-3.2 Breakage ability strong, breakage particle size and number more.
-3.3 With independence water and slurry injection system and washing clean device for cutter in particular;fit for big N value hard soil.
-3.4 Jacking speed is very fast, theory max, speed is 120mm per min.
-3.5 Operation precision high, adjust the direction from up and down, left and right, Max. corrective angle is 2.5 degree.
-3.6 jacking distance can be long.
-3.7 Adopt ground operation system, safe, intuition and convenient!
-3.8 Structure firm, use and maintain easy, convenient for dismantling in work tunnel receiving tunnel.

Model:DGR2200B-QNP		Parameter
Main machine dimension	Inner diameter (mm)	2200
	Outer diameter (mm)	2630
	Total length (mm)	7500
Cutting Part	Electromotor Power (kW)	37×4
	Cutterhead Torque (kN·m)	471
	Cutterhead Rotating Speed (r/min)	3
Oil cylinder of rectifying	Qty	8
	Thrust Force (kN)	1000
	Stroke (mm)	100
	Rectifying Angle (°)	±2
Hydraulic System	Electromotor Power (kW)	3.7
	Work Pressure (MPa)	31.5
Slurry system	Water Supply Pump Power (kW)	45
	Mud Pump Power (kW)	55
	Diameter of Side Mud pipes (mm)	150
Main Jacking system	Jacking Speed (mm/min)	0--80
	Work Pressure (MPa)	31.5
	Rated Jacking Force (kNm)	2000×8
	Timing Way	Adopt Frequency Control
	Total Power (KW)	15KW+22KW