The Queen of Quality Conical Screw Mixer for Powdered Paint Machine

China The Queen of Quality Conical Screw Mixer for Powdered Paint Machine, Find details about China Paddle Mixer, Single Shaft Paddle Mixer from The Queen of Quality Conical Screw Mixer for Powdered Paint Machine

Basic Info.

Model NO.

PNA

Certification

CE, ISO

Application Area

Food

Layout Type

Verticle

Mixing Drum Shape

Conical

Additional Capabilities

Drying, Granulating, Coating

Operating type

Cycle Operating

Condition

New

Construction Material

Carbon Steel, SS304, SS316L

Capacity Range

200 - 3, 000 Liters

Ex-Proof Version

Available

Polishing

Dull Polishing; Mirror Polishing

Reducer

Local Brand, Sew, Nord

Bearing

Local Brand, SKF, FAG, NSK

Trademark

PERMIX

Transport Package

Wooden Crates

Specification

Origin

China

HS Code

8474390000

Model NO.

PNA

Certification

CE, ISO

Application Area

Food

Layout Type

Verticle

Mixing Drum Shape

Conical

Additional Capabilities

Drying, Granulating, Coating

Operating type

Cycle Operating

Condition

New

Construction Material

Carbon Steel, SS304, SS316L

Capacity Range

200 - 3, 000 Liters

Ex-Proof Version

Available

Polishing

Dull Polishing; Mirror Polishing

Reducer

Local Brand, Sew, Nord

Bearing

Local Brand, SKF, FAG, NSK

Trademark

PERMIX

Transport Package

Wooden Crates

Specification

Origin

China

HS Code

8474390000

Product Desciption

the Queen of Quality Conical Screw Mixer for Powdered Paint Machine

BRIEF INTRODUCTION:
The PerMix PNA series Conical Screw Mixer is a batch mixing equipment used widely in mixing applications that require gentle mixing with minimal product distortion, minimal heat generation, and very accurate mixing homogeneity. Since it was first developed more than 60 years ago, it has been recognized as a good solution for the products which is delicate, heat sensitive or tending to segregate.

Due to the reason the PerMix Conical Screw Mixer uses the gravity to generate the significant downward massflow, it saves energy compared with a horizontal mixer.

These Conical Screw Mixers are also featured with no contamination to the product during the mixing, due to the fact that the shaft sealing & bearing is above the working area, thus no contact with the product.

HOW IT WORKS:
Inside of the PerMix Conical Screw Mixer, there is a cantilevered rotating screw (or two, three screws according to specified application) rotating by its own axle which is in parallel to and near the wall of the cone vessel. The mixing screw lifts the product around it from bottom to the top, and then the powder falls down due to the gravity, causing a convective mixing.

At the same time, the screw is supported by an orbital arm and is rotating around the center of the cone like a planetary, so that the powders in every corner of the cone can be mixed by the screw, and a 3-dimentional mixing performance occurs within the whole cone.

OPTIONS:
- Feeding & Discharging
A variety of feeding & discharging methods available.
- Screw Type
We offer single screw, double screw and triple screw to give different mixing intensity.
- Drive system
Drive system by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, etc.
- Construction Material and Finish
We are able to offer our PVR Mixers with contact part to be built in Carbon steel, SS304, SS316/316L, Titanium, Duplex stainless steel, Hastelloy, etc. Finish of internal and external finish can be dull polished, 180 grit polished (food grade), or mirror polished. For abrasive materials we offer hardened steel as the contact part.
- Spray nozzle
Liquid can be added into the powder by spray nozzles on the top.
- Heating/Cooling jacket
Jacketed trough for heating/cooling operation
- Vacuum drying & deaerating
PNA Conical Screw Mixers can be designed to a vacuum mixer dryer for vacuum drying & deaerating or for inner pressure working for special applications.

APPLICATIONS:
- Animal Care
Animal Feeds, Chicken Fattening Feed, Fish Foods, Mineral Feed, Pet Foods, Poultry Feed, Rabbit Feed, Veterinary Medicine
- Chemicals
Adhesives, Carbon Black, Dyestuff, Electrode Mass, Fly Ashes, Fungicides, Peat Moss Mixes, Pesticides, Pharmaceuticals, Pigments, Plastic Additives, Resins, Solid Lubricants
- Daily Care
Aromas, Cat Box Litter, Cleansers, Detergents, Potpourri
- Building Materials
Decorative Paste Coatings, Dry Mortar Mixes, Fibre Cement Cladding, Gypsum, Joint Compounds, Thermal Insulation Composit

Model	Total volume (liter)	Working volume (liter)	*Power () (kW)**	RPM	Dia. (mm)	H, total height () (mm)**	Inlet ()* (mm)	Outlet () (mm)	Weight (kg)
PNA-200	200	120	2.2+0.37	140/2	888	1557	140	230	500
PNA-300	300	180	2.2+0.37	140/2	990	1722	180	230	550
PNA-500	500	300	3+0.55	140/2	1156	1991	200	230	600
PNA-800	800	480	4+0.55	60/2	1492	2256	250	300	950
PNA-1000	1000	600	4+0.55	60/2	1600	2432	300	300	1200
PNA-1500	1500	900	5.5+0.75	60/2	1780	2725	300	300	1350
PNA-2000	2000	1200	5.5+0.75	60/2	1948	3001	350	350	1500
PNA-2500	2500	1500	7.5+1.5	60/2	2062	3024	350	350	1800
PNA-3000	3000	1800	7.5+1.5	60/2	2175	3207	350	350	2100
PNA-4000	4000	2400	11+2.2	40/2	2435	4010	400	400	2500
PNA-5000	5000	3000	15+2.2	40/2	2578	4260	400	400	3000
PNA-6000	6000	3600	18.5+3	40/2	2715	4470	400	400	3500
PNA-8000	8000	4800	22+3	40/1.3	2792	5000	400	450	3800
PNA-10000	10000	6000	30+4	40/1.3	3000	5240	500	450	4300

1. (*) (**) (***) (****): Changes are available according to the customer's request.
2. Customized sizes available as per request
3. All specifications and illustrations are as accurate as is reasonably possible, but they are not binding.
4. PerMix reserves the right to modify the design without notice.

Q: What is your price level compared with European suppliers and local Chinese suppliers?
A: Depending on the machine type and size, our price level is 30%-60% less than the European suppliers and 5-15% higher than the big local suppliers.

Q: Are you able to provide tailor-made design and production for the mixers?
A: Yes, in fact more than half of our mixers are tailor made, which is one of our strong points.

Q: Are you able to design and produce other processing equipment?
A: We are open to discuss about it.

Q: Can you provide machines to OEM customers, meaning to label their brands on the machines.
A: Yes we are doing it a lot. We have several OEM partners in the USA.

Q: Do you have agent network out of China?
A: Yes we do have agents but only in some countries, for example in USA, Germany, Poland, Spain, Denmark, Turkey, Argentina, etc. We are still looking for more agents because we believe to work with agents is the best way to do business.

Q: What is your delivery lead time of the mixing equipment.
A: Depending on the size and level of customization, but usually it is from 6-14 weeks.

Q: How do you pack and ship the mixing machines?
A: For machines don't require full container loading, we will pack them in wooden case. For FCL (full container loading) shipment, we will just wrap the machines in plastic films and fix them in the container. The shipment can be either by air or by sea