Products

Easy and Simple to Handle Chemical Double Screw Conical Mixer

China Easy and Simple to Handle Chemical Double Screw Conical Mixer, Find details about China Double Cone Mixer, Drum Hoop Mixer from Easy and Simple to Handle Chemical Double Screw Conical Mixer

Model NO.
PNA
Certification
CE, ISO
Application Area
Food
Layout Type
Verticle
Mixing Drum Shape
Conical
Additional Capabilities
Drying, Granulating, Coating
Operating type
Cycle Operating
Condition
New
Construction Material
Carbon Steel, SS304, SS316L
Capacity Range
200 - 3, 000 Liters
Ex-Proof Version
Available
Polishing
Dull Polishing; Mirror Polishing
Reducer
Local Brand, Sew, Nord
Bearing
Local Brand, SKF, FAG, NSK
Trademark
PERMIX
Transport Package
Wooden Crates
Specification
CE
Origin
China
HS Code
8474390000
Model NO.
PNA
Certification
CE, ISO
Application Area
Food
Layout Type
Verticle
Mixing Drum Shape
Conical
Additional Capabilities
Drying, Granulating, Coating
Operating type
Cycle Operating
Condition
New
Construction Material
Carbon Steel, SS304, SS316L
Capacity Range
200 - 3, 000 Liters
Ex-Proof Version
Available
Polishing
Dull Polishing; Mirror Polishing
Reducer
Local Brand, Sew, Nord
Bearing
Local Brand, SKF, FAG, NSK
Trademark
PERMIX
Transport Package
Wooden Crates
Specification
CE
Origin
China
HS Code
8474390000

Easy and Simple to Handle Chemical Double Screw Conical Mixe

BRIEF INTRODUCTION:
The PerMix PNA series Conical Screw Mixer is a batch mixing equipment used widely in mixing applications that require gentle mixing with minimal product distortion, minimal heat generation, and very accurate mixing homogeneity. Since it was first developed more than 60 years ago, it has been recognized as a good solution for the products which is delicate, heat sensitive or tending to segregate.
 
Due to the reason the PerMix Conical Screw Mixer uses the gravity to generate the significant downward massflow, it saves energy compared with a horizontal mixer.

These Conical Screw Mixers are also featured with no contamination to the product during the mixing, due to the fact that the shaft sealing & bearing is above the working area, thus no contact with the product.

HOW IT WORKS:
Inside of the PerMix Conical Screw Mixer, there is a cantilevered rotating screw (or two, three screws according to specified application) rotating by its own axle which is in parallel to and near the wall of the cone vessel. The mixing screw lifts the product around it from bottom to the top, and then the powder falls down due to the gravity, causing a convective mixing.

At the same time, the screw is supported by an orbital arm and is rotating around the center of the cone like a planetary, so that the powders in every corner of the cone can be mixed by the screw, and a 3-dimentional mixing performance occurs within the whole cone.

OPTIONS:
- Feeding & Discharging
A variety of feeding & discharging methods available.
- Screw Type
We offer single screw, double screw and triple screw to give different mixing intensity.
- Drive system
Drive system by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, etc.
- Construction Material and Finish
We are able to offer our PVR Mixers with contact part to be built in Carbon steel, SS304, SS316/316L, Titanium, Duplex stainless steel, Hastelloy, etc. Finish of internal and external finish can be dull polished, 180 grit polished (food grade), or mirror polished. For abrasive materials we offer hardened steel as the contact part.
- Spray nozzle
Liquid can be added into the powder by spray nozzles on the top.
- Heating/Cooling jacket
Jacketed trough for heating/cooling operation
- Vacuum drying & deaerating
PNA Conical Screw Mixers can be designed to a vacuum mixer dryer for vacuum drying & deaerating or for inner pressure working for special applications.

APPLICATIONS:
- Animal Care
Animal Feeds, Chicken Fattening Feed, Fish Foods, Mineral Feed, Pet Foods, Poultry Feed, Rabbit Feed, Veterinary Medicine
- Chemicals
Adhesives, Carbon Black, Dyestuff, Electrode Mass, Fly Ashes, Fungicides, Peat Moss Mixes, Pesticides, Pharmaceuticals, Pigments, Plastic Additives, Resins, Solid Lubricants
- Daily Care
Aromas, Cat Box Litter, Cleansers, Detergents, Potpourri
- Building Materials
Decorative Paste Coatings, Dry Mortar Mixes, Fibre Cement Cladding, Gypsum, Joint Compounds, Thermal Insulation Composit
 

Easy and Simple to Handle Chemical Double Screw Conical Mixer

ModelTotal volume
(liter)		Working volume
(liter)		Power (*)
(kW)		RPMDia.
(mm)		H, total height (**)
(mm)		Inlet (***)
(mm)		Outlet (****)
(mm)		Weight
(kg)
PNA-2002001202.2+0.37140/28881557140230500
PNA-3003001802.2+0.37140/29901722180230550
PNA-5005003003+0.55140/211561991200230600
PNA-8008004804+0.5560/214922256250300950
PNA-100010006004+0.5560/2160024323003001200
PNA-150015009005.5+0.7560/2178027253003001350
PNA-2000200012005.5+0.7560/2194830013503501500
PNA-2500250015007.5+1.560/2206230243503501800
PNA-3000300018007.5+1.560/2217532073503502100
PNA-40004000240011+2.240/2243540104004002500
PNA-50005000300015+2.240/2257842604004003000
PNA-60006000360018.5+340/2271544704004003500
PNA-80008000480022+340/1.3279250004004503800
PNA-1000010000600030+440/1.3300052405004504300
1. (*) (**) (***) (****): Changes are available according to the customer's request.
2. Customized sizes available as per request
3. All specifications and illustrations are as accurate as is reasonably possible, but they are not binding.
4. PerMix reserves the right to modify the design without notice.

Easy and Simple to Handle Chemical Double Screw Conical Mixer

Easy and Simple to Handle Chemical Double Screw Conical Mixer
Easy and Simple to Handle Chemical Double Screw Conical Mixer

Easy and Simple to Handle Chemical Double Screw Conical Mixer

Easy and Simple to Handle Chemical Double Screw Conical Mixer

Easy and Simple to Handle Chemical Double Screw Conical Mixer

Easy and Simple to Handle Chemical Double Screw Conical MixerEasy and Simple to Handle Chemical Double Screw Conical Mixer

Easy and Simple to Handle Chemical Double Screw Conical Mixer

Q: What is your price level compared with European suppliers and local Chinese suppliers?
A: Depending on the machine type and size, our price level is 30%-60% less than the European suppliers and 5-15% higher than the big local suppliers.

Q: Are you able to provide tailor-made design and production for the mixers?
A: Yes, in fact more than half of our mixers are tailor made, which is one of our strong points.

Q: Are you able to design and produce other processing equipment?
A: We are open to discuss about it.

Q: Can you provide machines to OEM customers, meaning to label their brands on the machines.
A: Yes we are doing it a lot. We have several OEM partners in the USA.

Q: Do you have agent network out of China?
A: Yes we do have agents but only in some countries, for example in USA, Germany, Poland, Spain, Denmark, Turkey, Argentina, etc. We are still looking for more agents because we believe to work with agents is the best way to do business.

Q: What is your delivery lead time of the mixing equipment.
A: Depending on the size and level of customization, but usually it is from 6-14 weeks.

Q: How do you pack and ship the mixing machines?
A: For machines don't require full container loading, we will pack them in wooden case. For FCL (full container loading) shipment, we will just wrap the machines in plastic films and fix them in the container. The shipment can be either by air or by sea

You Might Also Like