10.4"TFT LCD touch screen dispalys the Ventilation parameters,Alarm information and Oscillogram.
5 mechanical flowmeters, instantly show the fresh gas ,and internal electronicproportional valve controls mixture gas concentration.
Rapid oxygen supply button and ACGO suitable for emergency situation and revival after operation.
Real time oscillogram and high precision O2 concentration detection function included

Gas source: O2,N2O,AIR
Ventilation mode: IPPV,A/C,PCV,SIMV,SIGH,MANUAL
Vt:0,20-1500ml
I:E :4:1-1:8
Oscillogram:P-T,F-T,P-Vloop
 

Gas supply

1. Gas source                      O₂(For medical use)

                                                            N₂O(For medical use)
  Air(For medical use)

1. Input pressure range              280 kPa~600 kPa
2. Output pressure of regulator

(gas cylinder supply)                       less than 440 kPa

1. Safety valve                   780kPa

1. Negative pressure air source                ≥75 L/min

 

 Flow rate

1.  Adjust range of flow meter

O₂                           0.1 L/min~10 L/min
N₂O                         0.1 L/min~10 L/min
AIR                             0.1 L/min~10 L/min

1.  precision(20ºC 101.3kPa,supply pressure 440 kPa)     

The precision from 10 % of full scale to full scale is ±10 % of indicated value
The precision lower than 10 % of full scale is class 4.   

1. Linkage control of O₂  and N₂O flow rate

Adjust O₂ concentration to no less than 25 % according to proportion.

1. Flow rate of oxygen flush valve        25 L/min~ 75 L/min 
2. Output pressure for fresh valve             30 kPa ~ 45 kPa     

 Power supply

1. Voltage                         100-240 V ~
2. Frequency                           50/60 H_Z
3. Input power                   80VA

1. Fuse                                             

--Main power             T2AH 250V
--Internal power                   T4AH 250V




 

Ventilation mode

--IPPV
--A/C
--PCV                                         
--SIMV

Ventilation parameters

Specification

1. Frequency

--Adjusting range                         1 bpm ~ 100 bpm
(Under SIMV:1 bpm~ 40 bpm
All mode except SIMV:ADULT 4~40 bpm
PAED 20bpm~100 bpm )
--Allowable error                ± 15 %

1. Inhalation time(I:E)(Tinsp) 

--Adjusting range                       Adult 4:1(1:0.25) ~ 1:8
                                                        Paed. 2:1(1:0.5) ~ 1:8
Ti 0.2s ~ 12.0s
--Allowable error           ± 15 % or ± 0.1 s,whichever is the greater

1. Tidal volume(V_T)

--Adjusting range             0,20 mL ~ 1500 mL
And:                    
Adult                          250 mL ~ 1500 mL   
Paed.                   0,20 mL ~ 300 mL

1. Minute ventilation(MV)                

--Max MV                             
Adult                  ≥18 L/min
Paed.                ≥10 L/min

1. PEEP

--Adjusting range          0 kPa ~ 3kPa
-- Allowable error                    ± 15 % or ±(0.3 kPa+10 % setting valve)whichever is the greater

1. Pressure trigger(PTr)        

--Adjusting range                - 2.0 kPa ~ 0kPa(base on PEEP)
--Allowable error                 ±(0.1 kPa+10 %setting valve)

1. Flow trigger(FTr)                   

--Adjusting range                         0.5 L/min ~ 30 L/min
--Allowable error                              
    >3L/min:                                ±20%
≤3L/min:                                ±0.6 L/min

1. Pressure control(Pc)                     

--Adjusting range              0.5kPa ~ 6.0 kPa
-- Allowable error                         ± 15 % or ±(0.3 kPa+10 % setting valve)whichever is greater

1. Holding time(Inhalation platform)(TIP)    

--Adjusting range                        0 ~ 6s(0% ~ 50% of inhalation time)
--Allowable error                        ± 15 % or± 0.1 s,whichever is the greater

1. Sigh

     --Adjusting range                         0, 1/100 ~ 5/100
 (Sigh tidal volume is 1.5 to 2 times higher than setting valve of tidal volume)

1. Apnea ventilation

--Adjusting range                        OFF,5 s ~ 60 s

1. Max set working pressure(pressure limit range)                   

--Adjusting range                        2kPa ~ 10kPa
--Allowable error                        ± 15 % or ±1 kPa, whichever is the greater
                        

1. Max pressure                     ≤12.5 kPa

explanation:
1) set pressure limit value to produce maximum working pressure( the upper limit of high airway pressure alarm).
2) do not use negative pressure at exhalation.
3) maximum limit pressure is pressure of the safety valve.

Driven gas

1. Gas source                        O₂(For medical use)

1. Input pressure range                  280 kPa ~ 600 kPa

Fresh gascompensation

1. Compensation range             0 ~  15 L/min
2. gas composition                                  O₂, N₂O, AIR and anaesthetic

Ventilation parameter Monitoring

1. The following are monitoring parameters under the environment of body temperature and pressure-saturated. 
2. Minimum exhalation volume maybe monitored is 50 mL/min.
3. Fig.  display:

1. Waveform display:

--Time- airway pressure(under all modes)
--Time-flow(under all modes)
--pressure volume loop(all modes)
Remarks:The machine cannot record all the adjusting and monitoring values.