China Applicable to Oilfield Oil Water Separation Demulsifier, Find details about China Water Treatment, Wastewater Treatment from Applicable to Oilfield Oil Water Separation Demulsifier
Technical index:
Projects Indicators
appearance Light yellow viscous liquid
Density (25 ºC) [g / cm3] :1.00±0.10
Water solubility [min]:< 1.0
PH value (1% aqueous solution) > 3.0±1
Solid content [%] ≥ 40.0
3, Usage:
1. Adding 10-500ppm (the specific amount can be determined according to the experiment) to the oily wastewater, stirring for 1-2 minutes, the emulsion can be quickly broken.
2. Crude oil dehydration, adding 10-30g / L, stirring, can achieve oil-water separation, at 40-60 ºC, the effect is better.
3. The demulsifier has synergistic effect. After adding 5-100ppm PAC or PFAC or PFC, the water quality can be quickly cleared.
4. The amount of demulsifier and pH of wastewater can be adjusted to achieve the purpose of rapid demulsification and separation. The best pH is 6-7.
4, Note:
1. When the temperature is lower than 5 ºC, the reagent and 1-3 times dilution of the reagent will become white gradually, and will thicken or even solidify with the decrease of temperature. As the temperature increases, the solidified product will gradually melt and become thinner, and the whitening product will gradually become transparent. The properties of the product will not be affected after solidification or whitening reduction.
2. If the agent is placed for a long time, it will crystallize and precipitate crystalline substances, but it will not affect the use effect. The agent is easy to be biodegraded, does not affect the water quality, and is non-toxic.
5, Product packaging:
This product is packed in 25 plastic barrels, or according to the user's requirements.
6, Transportation and storage:
Prevent from sun exposure and rain during transportation; Store in a ventilated and dry place below 40 ºC; Avoid freezing, heating or direct sunlight; The shelf life of the product is 12 months.