Anti- Staining Soaping Agent for Washing Process Rg-Hfzl1420

China Anti-Staining Soaping Agent for Washing Process Rg-Hfzl1420, Find details about China Soaping Agent, Soaping from Anti-Staining Soaping Agent for Washing Process Rg-Hfzl1420

Model NO.
RG-HFZL1420
Trademark
Ruiguang
Specification
160kg/drum
Origin
China
HS Code
34021100
Model NO.
RG-HFZL1420
Trademark
Ruiguang
Specification
160kg/drum
Origin
China
HS Code
34021100
Soaping Agent RG-HFZL1420

Product overview:
anti-staining soaping agent RG-HFZL1420 is applied to wash reactive dyes, it has excellent soaping and stain resistance property in high concentrate electrolyte and high hardness condition. It can be widely used, saving water and energy, shorting process and enhancing productivity.

Main components:
High molecular polymer

Physical and chemical index:
Appearance: Light yellowish to brown viscous liquid
Density:           1.02-1.08g/cm3 (20ºC)
PH value:         6.0-8.0 (10% aqueous solution)
Ionicity:          Anionic / non-ionic
Solid content:   13.5-14.5%
Solubility:        Can be mixed with water in any proportion

Performance characteristic and application:
anti-staining soaping agent RG-HFZL1420 is active both in acid and alkaline conditions, under conditions of high concentrate salt (about 20g/L) and hardness up to 3000mg/kg(3000ppm) can give full play to the soaping efficiency. It has a strong affinity of hydrolyzed dyes, can prevent back-staining, also can short the soaping washing process significantly in the washing technology, and has those properties of saving water and energy, reducing sewage discharges. Also, this agent can give the fabrics higher fastness consistency and reproducibility.

Anti-staining agent RG-HFZL1420 has the following characters:
1, Anti-staining agent RG-HFZL1420 has excellent soaping property.
General requested the added salt concentration lower than 2g/L if the traditional soaping agent wants to get an excellent soaping effect, so to remove the fabric residual salt after dyeing, should wash repeatedly before dyeing and soaping washing. While anti-staining soaping agent RG-HFZL1420 due to its excellent soaping washing property, can give full play to excellent soaping effect under the condition of about 20g/L salt concentration, then obvious to short the washing process. In most cases, just wash one time after dyeing, then can proceed soaping wash.
If general soaping agents, often use a surface-active agent and protective colloid, etc., under the condition of water hardness is higher, the soaping effect declined obviously. But the anti-staining soaping agent RG-HFZL1420 can be full play excellent soaping effect even under the condition of the harness up to 3000mg/kg, even use poor quality water ( for example harness up to 200mg/kg above), can still get excellent soaping effect.
2, Excellent resistant to re-stain property.
Macromolecule of anti-soaping agent RG-HFZL1420 can trap hydrolyzed reactive dyes, can clad hydrolyzed dyes molecule, with the addition of affinity to hydrolyzed dyes, can firmly seal the hydrolyzed dye among in the soaping bath which enters into it in the soaping process, avoid concentrating of hydrolyzed dyes molecule and stick back to fibers or fabrics, so that has excellent resistant to re-staining property.
3, 
Wide application range.
Anti-staining agent RG-HFZL1420 can be applied kinds of structures such as reactive dyes soaping wash after dyeing vinyl sulfone, monochloro triazine, fluoride triazine, and two reactive groups and so on. Has a remarkable effect on different dye concentration, and kinds of dyeing equipment and fabric types (yarn, woven fabric, and knitted fabric).

Application method:
Reactive dye widely used in cellulosic fiber fabric dyeing and printing. Reactive dye need soaping wash after dyeing or printing, so that can enhance its various fastness, common soaping agent has surface-active agent type (such as industry soaping powder, etc.), chelating type (such as polyacrylate) and the blended type and so on. These soaping agents normally request the salt concentration of soaping bath under 2g/L when in reactive dye soaping process, and the water is soft (hardness is under 100mg/kg(100ppm). If the salt concentration is higher, it will occur "secondary dyeing" when the heating temperature for soaping wash, thus will make the floating color like direct dyes to dye the fabric again. While hard water will make the water-soluble high floating color (hydrolyzed dyes) become to anti-soluble sediment, both of them will reduce the soaping agent anti-staining ability, then greatly influence soaping effective.    
When anti-staining soaping agent RG-HFZL1420 applied in reactive dye soaping, it still has excellent soaping property and resistance to the re-staining property even under high concentration electrolyte and high hardness water conditions.
Furthermore, it has those advantages such as saving water and energy, enhance productivity. For example in the after washing of pure cotton yarn, it can save 4 times of washing than common process, can shorten the processing time about 30min; in after washing of pure cotton fabric, it can save 2 times washing than common process, and each performance index can reach to or a little higher than regular performance index.

anti-staining soaping agent RG-HFZL1420 application process example:
 
1, After washing process of yarn:
Fiber pure cotton yarn
Bath ratio:                 16:1
Dyeing recipe:              (%)
Reactive red EC             0.15
Reactive dark blue EC:       0.45
Reactive blue KN-R:         3.50
Sodium sulfate (g/L):         60
RCF caustic soda liquid (g/L):  3.0
Trisodium phosphate (g/L):    8.0

Traditional after wash technological process 
Washing (40ºC×5min) Washing (40ºC×5min)Acid neutralizing (15min) Washing (40ºC×5min)Washing (40ºC×5min)Soaping (1g/L of Soaping agent, 98ºC×10min)Washing (70~80ºC×5min)
Warm temperature washing (2~3min)Warm washing (2~3min)
Our company recommended technological process: 
Acid neutralizing (3g/L of Acetic acid, 50ºC×15min)Washing (40ºC×5min)Washing (1.5g/Lof anti-staining soaping agent RG-HFZL1420, 98ºC×10min)Washing (80ºC×5min)Washing (40ºC×2~3min)

Washing fastness test (Level) for pure cotton yarn reactive dyeing
 Washing fastness (ISO105-C03)Rubbing fastness

 
Dyed yarn
discoloring
Cotton color staining Nylon color staining Dry rubbing Wet rubbing
National standard3~43~4-3~43
anti-staining soaping agent RG-HFZL1420 4~54~544~53
       

Compared to the above two processes, when using an anti-staining agent
RG-HFZL1420 wash, can save common 4 times washing, reduce the sewage discharge, short process time for about 30 min, and enhance productivity greatly.
 
  1. After washing process of pure cotton knitted fabric
  2. Bath ratio:                 9:1
  3. Dyeing recipe:              (%)
  4. Reactive yellow RNF        4.160
  5. Reactive RED 3BS:         5.000
  6. Reactive blue BB:          0.078
  7. Sodium sulfate (g/L):        90.00
  8. Trisodium phosphate (g/L):   9.00

Traditional after washing technological process
Washing (40ºC×5min) Washing (40ºC×5min)Acid neutralizing (10min)Washing (95ºC×10min)Washing (95ºC×10min)Washing (60ºC×10min)Washing (10min)Fixing color Softening
Our company recommended soaping technological process:
Washing (40ºC×5min)Washing (1g/L of Anti-staining soaping agent RG-HFZL1420, 95ºC×10min)Washing (1g/L of Anti-staining soaping agent RG-HFZL1420, 95ºC×10min) Washing (60ºC×10min)Washing (10min)Fixing color Softening
Washing fastness test (level) of pure cotton knitted fabric after dyeing
 
 Washing fastness
(AATCC2A,49ºC)
Crabbing fastness
(AATCC8)
Dyed fabric
 discoloring
Cotton fabric
staining color 
Dry
crabbing
Wet
crabbing
Before fixing 4~54~54~53
After fixing 4~54~54~53

Pure cotton knitted fabric use Anti-staining agent RG-HFZL1420 to wash can save two times washing of regular process, reduce sewage discharge, short process time about 30 min, each performance index can reach to or a little better than clients common used washing process, and can save water and energy, as well as highly efficient.

The specific process should be appropriately adjusted according to the test.

Package and Storage:     
160kg plastic drum or according to clients' demands.
Prevent insolation and frozen, stored at room temperature. Sealed storage under the temperature of 2-25 degrees, the guarantee period can be 12 months.
The product should be used up as soon as possible once the package opened; packing should be tightly closed after use.