China Kpc150 50Hz Prime Output 135kVA 108kw Cummins (6BTAA5.9G2) Diesel Genset, Find details about China Electric Generator, Silent Generator from Kpc150 50Hz Prime Output 135kVA 108kw Cummins (6BTAA5.9G2) Diesel Genset
KPC150 50Hz Prime output 135KVA 108KW CUMMINS (6BTAA5.9G2) Diesel Genset
1.★ GENERATOR DATA/SPECIFICATION
Voltage Available:
50Hz: 380V/220V 400V/230V 415V/240V 480V/277V
60Hz: 220V/127V 230V/132V 220V/440V 240V/480V
Any special voltage is also available as client's request
Prime Power:
Comply with GB/T2820-97(eqv.ISO8528).
Genset can run unlimitedly under certain power range.
One hour 10% over load in every 12 running hours is allowed;
Standby Power:
standby power is the limit value of maximum output for emergency use.
It is off-oil power,overloading is prohibited
★ PRODUCT FEATURES
(1).Full control panel with power indicator light and oil light.
(2).Emergency shutdown for low oil pressure and high water temperature.
(3).Large fuel tank ensure continuous running.
(4).Low noise & vibration.
(5).Compact structure.
(6).Reliable performance.
(7).Easy for installation and maintenance.
(8).50Hz and 60Hz both are available for choice
2.★MAIN SPECIFICATION
Model: | KPC150 |
Prime Power (kw/kva ) | 120/135 |
Standby Power(kw /kva ) | 120/150 |
Rated Voltage | 400/230V (Adjustable) |
Frequency | 50Hz |
Radiator | 50°C suitable for tropical weather |
Power Factor | 0.8(lagging) |
Fuel: | Diesel |
Start Method: | 24V DC Start Battery |
Accessory: | Battery, wire, exhaust pipe, muffler, damper, breaker |
Altitude: | ≤1000m |
Base Feul Tank Capacity | Enough for Genset 8-10 Hours Continuous Running |
Engine Specifications | |
Brand & Model | DCEC Cummins 6BTAA5.9-G2 |
Country of Origin | USA joint-venture with china |
Cycle | 4 stroke |
Engine power (kwm) | 130kw |
Air intake way | Turbo |
Governor | Electronic |
Cylinder | 102*120 |
Bore*Stroke (mm) | 5.9 |
Displacement (L) | 208g/kw.h (27.8l/hr) against prime power |
Compression Ratio | 16.0:1 |
Total coolant capacity (L) | 29 |
Lubrication capacity (L) | 16.4 |
Fuel system | fuel pump |
Frequency & Speed | 50Hz, 1500RPM |
Cooling way | Water cooled |
Fuel consumption | 9.9L/h @100% full load |
Starting Method | DC24V electrical starting |
Cooling System: | Forced water cooling cycle |
Alternator Specifications | |
Alternator brand | STANFORD |
Model | STF274E 112KW |
Power Factor(COS Phi) | 0.8 |
Excite Type | Brushless SHUNT,AC Synchronous,Double bearing |
Connecting Type | 3 Phase & 4 Wires |
Insulation Degree | H |
Enclosure Degree | IP23 |
AVR voltage regulation rate | ≤±0.5% |
Voltage Regulation, Steady State | ≤±0.5% |
Transient State Voltage | ≤-15%~+20% |
Exciter Type: | Brushless, self-exciting, with AVR |
Insulation Class, Temperature Rise: | H/H |
Voltage Regulation: | ≥±5% |
Control System Specifications | |
Main Features: | a) Instruments:Analogue Volmeter,Hours Run Meter.Water pressure Meter. b) Controls:Emergency Stop Pushbutton,Volmeter Phase Selector Switch. |
Manufacturer: | DEEP SEA ELECTRONICS PLC (UK) |
Model: | DSE7310 |
Type: | Manual Operation |
Operation: | Via a three position key switch ;with STOP(O), RUN(I) and START(II). |
Alarm Protect: | Low Oil Pressure, High Engine Temperature, Auxiliary Shutdown, Charge Failure |
Δ Automatic mains failure | Δ Mains simulation |
Δ Engine control,Generator protection | Δ Block heater control |
Δ Built in alarms and warnings | Δ Field adjustable parameters |
Δ Remote Start operation available | Δ Free MS-Windows Remote monitoring |
Δ Daily / weekly / monthly exerciser | Δ LED displays |
Δ Weekly operation schedule programs | Δ Configurable analogue inputs |
Δ Fuel pump control | Δ I/O expansion capability |
Δ ECU control and monitoring via J1940 CANBUS | D+ preexcitation terminal |
AUTOMATIC MAINS FAILURE | 7 binary inputs and outputs |
Size and Weight | |
Open Type Overall Size: | 2400mm*820mm*1460mm |
Weight: | 1400 KG |
Soundproof Type Overall Size: | 2900mm*1100mm*1630mm |
Weight: | 2600 KG |
The main specification of KPP23 | |
Model: | KPP23 |
Prime Power: | 16KW / 20KVA |
Standby Power: | 18KW / 23KVA |
Frequency: | 50HZ |
Voltage: | 400/230V |
Phase: | 3 Phase |
P.F: | 0.8 |
Fuel: | Diesel |
Rated Current: | 28.8A |
Start Method: | 24V DC Start Battery |
Accessory: | Battery, wire, exhaust pipe, muffler, damper, breaker |
Altitude: | ≤1000m |
Engine Specifications | |
Air Intake System: | Natural |
Fuel System: | Direct Injection |
Cylinder Arrangement: | 4 in line |
Displacement: | 2.216L |
Bore and Stroke: | 84×100 mm |
Compression Ratio: | 23.3 |
Rated RPM: | 1500rpm |
Maximum Output Power: | 20.6KW/28HP |
Governor Type: | Mechanical |
Alternator Specifications | |
Manufacturer: | KANPOR STAMFORD CO LTD |
Model: | STF184E |
Rated Capacity: | 16 KW |
Winding: | 100% Copper Wire |
Frequency: | 50HZ |
Speed: | 1500 RPM |
Connecting Type: | 3 Phase and 4 Wires, "Y" type connecting |
Power Factor: | 0.8 |
Protection Grade: | IP23 |
Exciter Type: | Brushless, self-exciting, with AVR |
Insulation Class, Temperature Rise: | H/H |
Alternator Warranty: | 1 Year No Time Limited |
Voltage Regulation: | ≥±5% |
CONTROLLER | DSE7310/HGM6110 |
Manufacturer: | DEEP SEA ELECTRONICS PLC (UK) |
Model: | DSE7310 |
Type: | Manual Operation |
Operation: | Via a three position key switch ;with STOP(O), RUN(I) and START(II). |
Alarm Protect: | Low Oil Pressure, High Engine Temperature, Auxiliary Shutdown, Charge Failure |
Δ Automatic mains failure | Δ Mains simulation |
Δ Engine control,Generator protection | Δ Block heater control |
Δ Built in alarms and warnings | Δ Field adjustable parameters |
Δ Remote Start operation available | Δ Free MS-Windows Remote monitoring |
Δ Daily / weekly / monthly exerciser | Δ LED displays |
Δ Weekly operation schedule programs | Δ Configurable analogue inputs |
Δ Fuel pump control | Δ I/O expansion capability |
Δ ECU control and monitoring via J1940 CANBUS | D+ preexcitation terminal |
AUTOMATIC MAINS FAILURE | 7 binary inputs and outputs |