
Introuduction :
Plasma Freckle removal pen work principle : similar as carbon dioxide (CO2) laser beauty machine, it use new generation of plasma micro district discharge technology with low temperature and high frequency , it is efficient capacity conversion material and chip control . when the needle touch the freckle skin,it produce plasma with high temperature as 2000 ºC immedicately, then it can carbide the spot freckle , removal it.
When it touch the freckle ,spot ,it will produce a small flame,we called it carbide problem skin.The micro vascular will be solidified quicly without bleeding.Then it will formed carbon scabs ,protect wound skin from infection. After about 1 week, scab will sheeding without scar.
Appliaction:
Removal spot, freckle ,verruca plana, flat warts, nervus sebaceous, granuloma,
skin neoplasm, fat granule, hemangioma, eyelid lift
Eyelid upper pen work with advanced over-current plasma fire, once touch organic stuff soon raise temperature to 755 -2000 degree centigrade,
max power 2500W to keep wound soon carbinization and soon reciver.However wound size only 0.06mm so without bleeding and scars.
Parameter:(Maglev plasma pen) |
Model name | FR-PB03 |
Battery | Lithium Battery(3.7V,400mAh) |
LED light | Yes |
Speed level | 2 levels |
Body Color | white,orange |
Body material | PC+ABS |
Input Voltage | 100-240V |
Output Voltage | 5V,1000MA |
One box contain | 1 device+4 needles+1 charger+1 user manual |
Advantages
-Remove completely: instantly eliminate skin neoplasms and strong sterilization and never relapse
-No bleeding: can avoid various lesions caused by bleeding and medical risk
-Wound easy to recover without bandage
-No scar left
-Ease use: it can work for about 2-3 hours after 1 time charge.
-Economical and practical: it is cheap and needle can reuse.
-Easy to take
How to use the maglev plasma pen?
1. Clean face,apply the anesthesia
2. Sterilize face
3. Needle disinfect ( needle immerse in disinfectant for 5-10 minutes)
4. Do treatment ( we have videos to show you how to operate)
5. After treatment, if needle have any carbide, use knife scrape it or sand paper rub it.
6.Needle should be disinfected before use
