Standard specification

Application

Indoor, outdoor, 16-hr operation daily.

Horizontal span (m)

≤50

Inclination (°)

10/11/12

Step width (mm)

800/1000

Upper landing horizontal distance (mm)

400

Speed (m/s)

0.5

Main power

380V/50Hz/3P

Balustrade

Tempered glass (10mm)

Handrail bracket

Stainless steel

Handrail

Black

Balustrade height (mm)

900

Inner & outer decking

Hairline stainless steel

Skirting

Hairline stainless steel

Step

Stainless steel

Landing plate

Stainless steel (anti-sliding)

Illumination

Lighting under upper & lower landing pallets

Indicator

Failure code indicator on control cabinet

Operation

Emergency stop button

Key switch

Inspection operation

Safety devices

Static electricity protection

Eliminate static electricity raised from running of the steps (pallets).

Standard

Static electricity protection of handrail

Eliminate static electricity raised from tunning of the handrail.

Standard

Emergency stop of button on entrance

Push the emergency stop button to stop the escalator (moving walk) against emergency raise.

Standard

Handrail entry safety protection

Protection against risk of the sundries being jammed into handrail entry.

Standard

Over speed protection

Protection against risk of speed being over 20% of rated speed.

Standard

Under speed protection

Protection against risk of speed being less than 20% of rated speed.

Standard

Unintentional reversal protection

Protection against risk of unintentional reversal of the direction of travel.

Standard

Phase failure protection

Protection against risk of phase failure.

Standard

Short circuit protection

Protection against risk of short circuit.

Standard

over-load protection

Protection against risk of motor continually over load.

Standard

Step (pallet) loss protection

It stops when it monitors the step (pallet) loss.

Standard

Step (pallet) sagging protection

Protection against risk of steps (pallets) being breakage and sagging.

Standard

Step (pallet) chains safety protection

Protection against risk of steps (pallets) chains being breakage of undue elongation.

Standard

Comb safety guard

Protection against risk of the sundries being trapped at the comb.

Standard

Inspection socket

To provide voltage to inspect or maintain.

Standard

Machine room guard

One safety plate separates machine room from movable parts such as step to protect service personnel.

Standard

Emergency stop button on control cabinet

Push the emergency stop button to stop the escalator (moving walk) against emergency raise when inspection and maintaining.

Standard

Handrail speed- detection protection

When the step (pallets) brake distance is 1.2 times larger than the stipulated distance, it prevents it from start again.

Standard

Skirting guard

Protection against risk of foreign objects being jammed into clearance between steps (pallets) and skirting.

Standard

Floor anti-start protection

It stops when the floor plate is removed or opened.

Standard

Main drive chains safety protection

Protection of risk of drive chains being breakage or undue elongation.

Standard

Skirting brush

Brushes on skirting to enhance the passenger's safety.

Standard

Host brake detection

When it detects the release condition of the host brake, it prevents it from start before its release.

Standard

Anti-crawl device

It prevents the passengers from crawling to external handrail.

Optional

Anti-skid device

It installs outer cover plate which is closed to handrail height. It prevents the passengers from accidental crawl, skid, and fall.

Optional

Arrester

It prevents the passengers from entering into the area between wall and handrail, between two escalators (moving walk).

Optional

Protection baffle

Protection baffle is set in the crossing of outer handrail edge and any obstacle.

Optional

Auxiliary brake

When it exceeds 1.4 times of the speed; the steps (pallets) and handrail running direction is opposite to the indicated direction, auxiliary brake stops the escalator (moving walk).

Optional