China Supplier Passenger Elevator with Advanced Technology

China Supplier Passenger Elevator with Advanced Technology, Find details about China Passerger Lift, Passenger Elevator from China Supplier Passenger Elevator with Advanced Technology

Model NO.
GRPS20
Deceleration Device
With Deceleration Device
Guide Rail
T Guide
Elevator Door
Center Opening Door
Door Knife
Double
Attendant
Without Attendant
Car Wall
Hariline Stainless Steel
Cabin Door
Hairline Stainless Steel
Landing Door
Hairline Stainless Steel
Traction Machine
Permanent Magnet Gearless
Trademark
SRH(Safe Reach)
Transport Package
Wooden Case Suitable for Elevators
Specification
CE, Gost, ISO9001, ISO14001 ceritifcates
Origin
Zhejiang, China (Mainland)
HS Code
8428101090
Model NO.
GRPS20
Deceleration Device
With Deceleration Device
Guide Rail
T Guide
Elevator Door
Center Opening Door
Door Knife
Double
Attendant
Without Attendant
Car Wall
Hariline Stainless Steel
Cabin Door
Hairline Stainless Steel
Landing Door
Hairline Stainless Steel
Traction Machine
Permanent Magnet Gearless
Trademark
SRH(Safe Reach)
Transport Package
Wooden Case Suitable for Elevators
Specification
CE, Gost, ISO9001, ISO14001 ceritifcates
Origin
Zhejiang, China (Mainland)
HS Code
8428101090
We apply the advanced micro-processing network control technology for Rhine GRP20 passenger lift. High performance CPU and large capacity storage space, CAN-BUS serial communication produce the extremely strong anti-interference capabilities and perfect lift operation functions. The users can increase special functions according to the specific needs.

Standard Function

VVVF drive
Photocell protection
Micro-touch button for car call and hall call

VVVF door operator
Designated stop
Floor and direction indicator inside car

Independent running
Overload holding stop
Floor and direction indicator in hall

Automatic pass without stop
Anti-stall timer protection
Emergency car lighting

Automatically adjust door opening time
Start protection control
S Inching running

Reopen with hall call
Inspection operation
Five way intercom

Express door closing
Fault self-diagnosis
Bell

Car stops and door open
Repeated door closing
Fire emergency return

Car arrival gong
Up/down over-run and final limit

Protection
Up/down over-run and final limit

Protection
Car ventilation,

Light automatic shut off

Command register cancel
Down over-speed protection device
Remote shut-off

Upward over-speed protection device
RPS20/GRPN20 FUNCTION
   
Standard Function 
Travel FunctionVVVF driveMotor rotating speed can be precisely adjusted to get smooth speed curve in lift start,travel and stop and gain the sound comfort.
VVVF door operatorMotor rotating speed can be precisely adjusted to get the more gentle and sensitive door machine start/stop
Independent runningThe lift can not respond to outer calling,but only respond to the command inside the car through the action switch
Automatic pass without stopWhen the car is crowded with the passenger or the load is close to preset value,the car will automatically pass the calling landing in order to keep maimum travel efficiency
Automatically adjust door opening timeDoor-open time can be automatically adjusted according to the difference between landing calling or car calling
Reopen with hall callIn the door shutting process,press reopen with hall call button can restart the door
Express door closingWhen the lift stops and opens the door, press door-shut button,the door will be closed immediately
Car stops and door openThe lift decelerates and levels,the door only opens after the lift comes to a complete stop
Car arrival gongArrival gong in the car top announces that the passengers arrive
Command register cancelIf you press the wrong floor coomand button in the car, twice continuous pressing of the same button can cancel the registered command
Direct parkingIt completely accords with distance principle with no crawling in the leveling. It greatly enhances the travel efficiency
Safety functionPhotecell reptectionIn the door open and shut period,infrared light that covers the whole door height is used to probe the door protection device of both the passengers and objects
 Designated stopIf the lift can not open the door in the destination floor out of some reason,the lift will close the door and travel to the next designated floor
 Overload holding stopWhen the car is overload,the buzzer rings and stops the lift in the same floor
 Anti-stall timer protectionThe lift stops operation due to slippery traction wire rope
 Start protection controlIf the lift does not leave door zone within the designated time after it gets started,it will stop the operation
 Inspection operationWhen the lift enters into inspection operation,the car travels at inching running
 Fault self-diagnosisThe controller can record 62 latest troubles so as to quickly remove the trouble and restore the lift operation
 Repeated door closingIf the lift can not close the door due to certain obstacle or interference, the lift will reopen or re-shut the door until sundries results in more safe and reliable lift travel
 Up/down over-run and final limit protectionThe device can effectively prevent from the lift's surging to the top or knocking the bottom when it is out of control.It results in more safe and reliable lift travel
 Down over-speed protection deviceWhen the lift downs 1.2 times higher than the rated speed, this device will automatically cut off control mains,stop the motor running so as to stop lift down at over-speed. If the lift continues to down at over-speed, and the speed is 1.4 times higher than rated speed, safety tongs act to force the lift stop in order to ensure the safety
 Upward over-speed protection deviceWhen the lift up speed is 1.2 times higher than rated speed, the device will automatically decelerate or brake the lift
Man-machine interfaceMicro-touch button for car call and hall callNovel micro-touch button is used for operation panel command button in the car and landing calling button
Floor and direction indicatior inside carThe car shows the lift floor location and current travel direction
Floor and direction indicator in hallThe landing shows the lift floor location and current travel direction
Emergency functionEmergency car lightingEmergency car lighting automatically activated once power failure
Inching runningWhen the lift enters into emergency electric operation,the car travels at low speed inching running
Five way intercomCommunication amid car,car top,lift machine room,well pit and rescue duty room through walkie-talkie
Fire emergency returnIf you start key switch in main landing or monitor screen,all the callings will be cancelled.The lift directly and immediately drives to the designated rescue landing and automatically opens the door
Energy-saving functionCar ventilation, light automatic shut offIf there is no calling or command signal within the stipulated time, the car fan and lighting will be automatically closed in order to save the energy
Remote shut-offThe lift can be called to main landing(after finishing the service) through the key switch and automatically exists the service
Optional Function 
Emergency functionLeveling when power failureIn normal power failure, the chargeable battery supplies the lift power. The lift drives to the nearest landing
BellIn emergency conditions,if bell button above car operation panel is continuously pressed,electric bell rings on top of the car
Travel FunctionAnit-nuisanceIn the light lift load,when three more commands appear, in order to avoid the unnecessary parking, all the registered calling sin the car will be cancelled
 Open the door in advanceWhen the lift decelerates and enters into door open zone, it automatically opens the door to enhance the travel efficiency
 Group control functionWhen three or more same model lifts can unanimously respond the calling signal through the computer dispatch.In this way, it reduces the passenger' waiting time to the greatest extent and enhances the travel efficiency as well
 Duplex controlTwo sets of same model lifts can unanimously respond the calling signal through the computer dispatch.In this way,it reduces the passengers' waiting time to the greatest extent and enhances the travel efficiency as well.
 On-duty peak serviceWithin the preset on-duty time,upward transport from the home landing is extremely busy.The lifts are continuously dispatched to the home landing in order to satisfy on-duty peak service
 Off-duty peak serviceWithin the reset off-duty period,the lifts are continuously dipatched to top floor in order to satisfy off-duty peak service
 Door open time extendingPress special button in the car, the lift door keeps open for certain period of time
Man-machine interfaceVoice announcerWhen the lift normally arrives,voice announcer informs the passengers about the relevant information
 The second operation boxIt is used in the large loading weight lifts or the lifts with crowded passengers so that more and more passengers can use the car
 Operation box for handicappedIt is convenient for the wheelchair passengers and those who have vision problems
 Intelligent calling serviceThe car command or hoist-way calling can be locked or connected through special interlligent Input
 IC card control functionAll(patial)landings can only input car commands through IC card after the authorization
Monitor functionRemote monitorThe lift long-distance monitor and control can be fulfilled through moderm and telephone.It is convenient for the factories and service units to timely know the travel conditions of every lift and promptly take the correspinding measures
Camera function in the carThe camera is installed in the car to monitor the car conditions