Always be prepared... maintain safety, alertness and caution on the road with this set of reflective emergency triangles. These bright visible markers quickly alert other drivers and first responders of a vehicle stopped in the road.

Get all eyes on you when it matters most. These plastic triangles are designed with a vivid fluorescent orange color for maximum daytime visibility and red acrylic reflectors that provide illumination from headlights in the dark.

Durably constructed with a heavy duty non-skid base that can resist up to 40 mph winds without blowing over. Rubber foot pads and snap pin slots hold each triangle in place until the emergency is cleared. 17 inch height and over 3 lbs. weight.

Because one just isn't enough. Place one in front, one behind and one to the side of stopped vehicles. Create an effective portable emergency kit for every vehicle you own. The triangles fold and come with a convenient travel case.

These roadside reflective emergency triangles are US Department of Transportation (DOT) compliant and designed to meet or exceed all DOT FMVSS 571.125 standards. For first responders, road crews, traffic direction and personal use.
 

Before using warning signs,you must first open the hazard lights,and put warning triangle behind the vehicle on the back of the car with 30 to 100 meters

To extend product life,when warning signs are not used,please fold the reflector and supporting put them inside the plastic protective case

Products in the transportation and stprage,need be taken care that avoiding the falling

Opening steps

1.  The warning triangle will be removed from the plastic case ,face to face their own reflection,press as the arrow shown in Figure1,      the left and right mirror are slowly of patchwork opened,refer to the next state in Figure 2

2. The right hand holding a mirror.left mirror left hand slowiy downward pressure,as shown in Figure 3 the arrow has been pressed in the end the following figure 4

3. Open the bracket,as shown in Figure 4 the arrow to open slowly to stand 90 degrees,as Figure 5 bucket state at this time warning triangle has been completely opened,you can use a horizontal surface

Folding steps

1. Facing to the warning triangle

2. Picking up the bracket,as shown in Figure 1 ,slowly away to the next bracket as Fifure

3. With the left hand holding the left mirror,with the mirror slowly being forced to the right down with the pressure(as shown in Figure 3),has been pressure in the end,as Figure 4 status,and then slowly pressing down the left reflector,as figure 5

4. Put the warning triangle inside of the case for next time using.

We are professional manufacturer of automotive warning triangle and auto safety kits. The warning triangle explored by our company according to ECE27R European requirements and we also got certificate of E-MARK. Our market is global and we have exported to Italy, UK, Germany, South Africa and so on. 

Our company is operating with the quality ensure system of ISO 9000. It's business objectives are: First-class brand, build first-class enterprise. The company has a complete and scientific quality management team. Company produces a variety of products strict quality control, with strength and quality of products recognized by the industry. 

OEM and ODM is acceptable, welcome you contact us.

Our laboratory has high and low temperature test, salt fog test, reflection coefficient test, pneumatic test room, and independently the performance test of durability, reflection rate, wind resistance and so on.

Q1: What's the sample lead time?
A: Within the agreed time,our sales team will follow up for you to ensure that the product quality is qualified,you can consult the progress at any time.

Q2: What's the delivery time?

A: Confirm and arrange production, The premise that assures quality, Sample needs 5-10days, mass production time needs 20-30 days (Different products have different production cyclesm,We will follow up the production trend, Please keep in touch with our sales team.)

Q3: Can we just order small quantity?
A: Of course,small quantity change into big quantity,so we hope we can give us a chance,reach a win-win goal in th end.

Q4: Can we customize the product?
A: We provide you with a professional design team, including product design and packaging design, you only need to provide requirements. We will send the completed documents to you for confirmation before arranging production.

Q5: How does your factory do regarding quality control?
A: Quality is priority. We pay much attention to the quality check,we have QC in every production line. Every product will be fully assembled and carefully tested before it's packed for shipment.

Q6: What Certificates do you have?
A: Our products are complied with the E-MARK ECE R27.

Q7: Do you have any sales serivce?
A: Yes, we do 1 Year Warranty for any of our products.We keep promise we do full refund for the defective products.