Oxygen Generator System Medical Grade Medical Molecular Sieve Oxygen Making System Medical Gas Oxygen Cylinder Filling System
China Oxygen Generator System Medical Grade Medical Molecular Sieve Oxygen Making System Medical Gas Oxygen Cylinder Filling System, Find details about China Medical Oxygen Manifold System, Medical Oxygen Supply System from Oxygen Generator System Medical Grade Medical Molecular Sieve Oxygen Making System Medical Gas Oxygen Cylinder Filling System
Basic Info.
Model NO.
HY-224
Design Pressure
0.8MPa
Filling Pressure
200bar
System Design Service Life
10-15 Years
Explosion Proof Requirements for System
Non Explosion Proof Design
The Degree of Automation of System Desig
Automatic Unattended
The Device Has Capacity Expansion Capaci
10% Design Margin
Flexibility of System Operation
Adjustable Within The Rated Range
Trademark
HOYO
Transport Package
Cartons or Pallet
Specification
50m3 / h
Origin
Hefei, China
HS Code
90192000
Model NO.
HY-224
Design Pressure
0.8MPa
Filling Pressure
200bar
System Design Service Life
10-15 Years
Explosion Proof Requirements for System
Non Explosion Proof Design
The Degree of Automation of System Desig
Automatic Unattended
The Device Has Capacity Expansion Capaci
10% Design Margin
Flexibility of System Operation
Adjustable Within The Rated Range
Trademark
HOYO
Transport Package
Cartons or Pallet
Specification
50m3 / h
Origin
Hefei, China
HS Code
90192000
Product Desciption
PSA oxygen generation system Oxygen high pressure cylinder Medical GradeThe altitude is more than 1000 meters Purity: ≥ 93%, flow rate: 50m3 / h, (pressure:200barAutomatic filling system)
design parameters
Technical index of terminal product gas:
Executive standard
1) The warranty period of the oxygen generation system shall be 12 months from the commissioning of the user's factory, or 18 months from the date of signing the contract, whichever comes first;
2) The service life of the main parts of the equipment, i.e. pneumatic valve and special molecular sieve for oxygen generation, shall not be less than 5 years. During this period, if the equipment fails to meet the technical indexes specified in the contract due to the quality problems of pneumatic valve and special molecular sieve for oxygen generation, Party B shall be responsible for repairing or replacing the new pneumatic valve and special molecular sieve for oxygen generation free of charge.
3) During the warranty period, the supplier shall bear the cost of repairing or replacing the oxygen making equipment and parts provided by Party B due to quality problems, and the user shall bear the cost of repairing or replacing the equipment due to wrong operation and improper use. After the expiration of the warranty period, the supplier shall provide lifelong equipment maintenance service, and ensure the smooth supply of accessories and preferential prices.
2. After sales service
Standardized procurement, inspection, test and commissioning
Passed ISO9001 quality management system certification
Passed ISO13485 medical device quality management system certification
Pass CE EU certification
In case of rework or equipment damage caused by errors in our company's drawings, data and technical documents or on-site guidance of technical service personnel, our company shall immediately be responsible for free repair or replacement. Our company will not be responsible for repairing or replacing the spare parts, and will immediately terminate the warranty period if it is not caused by the information provided by our company, spare parts or technical service personnel's on-site guidance error.
Establish user electronic files to assist users in equipment management
FAQ
Q1. What is the advantage about your company?
A1. Our company has professional team and professional production line.
Q2. Why i should choose your products?
A2. Our products are high quality and low price.
Q3. Any other good service your company can provide?
A3. Yes,we can provide good after-sale and fast delivery.
Pls feel free to contact us if you are interested!!! Will always try to reply you within 24 hours after receiving your enquiry.
We are sure we can satisfy you with our full product range, professional knowledge & best after sales support.
design parameters
Technical index of terminal product gas:
| 1 | Product gas: | Oxygen (O2) |
| 2 | Gas production capacity: | 50Nm3/h |
| 3 | Oxygen purity: | 93% |
| 4 | Oxygen recovery rate: | ≥40% |
| 5 | Oxygen dew point: | ≤-45ºC |
| 6 | Operation mode: | Automatic unattended control |
| 7 | Detection method of oxygen content: | On line detection |
| 8 | The device has capacity expansion capacity: | 10% design margin |
| 9 | Flexibility of system operation: | Adjustable within the rated range |
| 10 | Valves: | Screw type |
| 12 | Design pressure: | 0.8MPa |
| 13 | System operating pressure: | ≤ 5bar (adjustable according to customer's site requirements) |
| 14 | Filling pressure: | 200bar |
| 15 | System pressure loss: | ≤ 5% (pressure loss at inlet and outlet) |
| 16 | System design service life: | 10-15 years |
| 19 | Explosion proof requirements for system design: | Non explosion proof design |
| 20 | The degree of automation of system design is as follows | Automatic unattended |
System utility requirements:
| name | Voltage | power |
| screw compressor | 3Ph,220V,60HZ | 90KW |
| Freeze dryer | 3Ph,220V,60HZ | 3.5KW |
| oxygenerator | 1Ph,220V,60HZ | 0.2KW |
| Oxygen booster | 3Ph,220V,60HZ | 18.5KW |
| total | 113.2KW | |
| It takes two tons of water to circulate | ||
Executive standard
| production | Oxygen generator: according to jb6427 / 92 standard Pressure vessel: according to GB 150-1998 standard Welding: according to JB / t4709-92 standard Wire arrangement and installation: Standard gb5226-96 Iso9001:2016 certification Iso13485:2016 certification CE EU certification |
| inspect | Oxygen content detection: range: 21% ~ 98% Flow test: flowmeter Acceptance standard: according to the contract and the buyer's requirements Before acceptance, it can be installed and debugged on site. |
warranty period and after-sales service commitment
1. Warranty period1) The warranty period of the oxygen generation system shall be 12 months from the commissioning of the user's factory, or 18 months from the date of signing the contract, whichever comes first;
2) The service life of the main parts of the equipment, i.e. pneumatic valve and special molecular sieve for oxygen generation, shall not be less than 5 years. During this period, if the equipment fails to meet the technical indexes specified in the contract due to the quality problems of pneumatic valve and special molecular sieve for oxygen generation, Party B shall be responsible for repairing or replacing the new pneumatic valve and special molecular sieve for oxygen generation free of charge.
3) During the warranty period, the supplier shall bear the cost of repairing or replacing the oxygen making equipment and parts provided by Party B due to quality problems, and the user shall bear the cost of repairing or replacing the equipment due to wrong operation and improper use. After the expiration of the warranty period, the supplier shall provide lifelong equipment maintenance service, and ensure the smooth supply of accessories and preferential prices.
2. After sales service
Standardized procurement, inspection, test and commissioning
Passed ISO9001 quality management system certification
Passed ISO13485 medical device quality management system certification
Pass CE EU certification
In case of rework or equipment damage caused by errors in our company's drawings, data and technical documents or on-site guidance of technical service personnel, our company shall immediately be responsible for free repair or replacement. Our company will not be responsible for repairing or replacing the spare parts, and will immediately terminate the warranty period if it is not caused by the information provided by our company, spare parts or technical service personnel's on-site guidance error.
Establish user electronic files to assist users in equipment management
FAQ
Q1. What is the advantage about your company?
A1. Our company has professional team and professional production line.
Q2. Why i should choose your products?
A2. Our products are high quality and low price.
Q3. Any other good service your company can provide?
A3. Yes,we can provide good after-sale and fast delivery.
Pls feel free to contact us if you are interested!!! Will always try to reply you within 24 hours after receiving your enquiry.
We are sure we can satisfy you with our full product range, professional knowledge & best after sales support.
You Might Also Like
ANSI B16.9 Pipe Fitting Carbon Steel Concentric Reducer
LED 18W Linear Lamp Batten pendant Light
Wholesale S195 S1100 S1105 S1110 S1115 S1125 S1130 Single Cy......
Enamel Steel Biogas Digester Anaerobic Reactor Plant
Ca6140 Universal Metal Cutting Turning Engine Horizontal Man......
Forklift Truck 3.5 Ton Diesel on Sale
Kejie Wall Mounted Rechargeable Emergency Light
API Certified Xj550 Truck-Mounted Drilling Rig and Mobile Wo......
Zm01 Mini Mobile Thermal Receipt Printer Pocket WiFi Bill PO......
Household Stainless Steel and ABS Fruit and Vegetable Slicer