0.45micron DOE 10 20 30 40 Inch PP Pleated Sediment Microns Water Filter pleated DOE filter with PP Membrane (EPDM gasket)

China 0.45micron DOE 10 20 30 40 Inch PP Pleated Sediment Microns Water Filter pleated DOE filter with PP Membrane (EPDM gasket), Find details about China WATER filtration, WATER filter from 0.45micron DOE 10 20 30 40 Inch PP Pleated Sediment Microns Water Filter pleated DOE filter with PP Membrane (EPDM gasket)

Basic Info.

Model NO.

pp 40 inches 0.45micron pleated doe filter

Material

nylon/polyeater/PTFE/pes/PP/PVDF

69mm

Application

Organic solvent, sterile gas filtration

core/end cap

inner support

Connection

flat/222/226

Micron rating

0.1/0.22/0.45

Trademark

Huahang

Transport Package

Carton

Specification

0.1/0.22/0.45/2/5 micron

Origin

Henan, China

HS Code

8421999090

Model NO.

pp 40 inches 0.45micron pleated doe filter

Material

nylon/polyeater/PTFE/pes/PP/PVDF

69mm

Application

Organic solvent, sterile gas filtration

core/end cap

inner support

Connection

flat/222/226

Micron rating

0.1/0.22/0.45

Trademark

Huahang

Transport Package

Carton

Specification

0.1/0.22/0.45/2/5 micron

Origin

Henan, China

HS Code

8421999090

Product Desciption

Highly Effective 99.99% Absolute PES Membrane 0.22 Micron Filter replace Parker 3M Sartorius cartridge filter

Product Description:

DOE 10 20 30 40 inch pleated sediment microns water filter with PP membrane (EPDM gasket),
Microporous pleated filter element, the main filter material is : Stainless steel wire mesh, sintered wire mesh,Polypropylene, Hydrophobic PTFE, Hydrophilic PTFE,Polyether sulfone, Nylon, etc.
Most of the raw materials are imported from abroad.Pleated filter element is a kind of deep filtration filter,
it is usuaslly used as liquid overheating,clarification, filtration and terminal filter.It has the following characteristics: the superfine polypropylene fiber membrane as the filtration medium, low pressure differential, high flux, good filtration precision, lower economic cost. The whole structure of polypropylene, end cover, housing and center pole adopts polypropylene material; It adopts the hot melt welding process, PP and PP melt bonding,without any binder. It has wide range of chemical compatibility, and also has a series of pore size and form a variety of interface.Material: Pleated filter, Support layer, End-cover, Inside & Outside cylinder are polypropylene.
Welding: It adopts the uniquehot melting methods, no glue, no foreign body fall off.
Typical use: Pharmaceutical, Food, Chemical, Electronics, Environmental protection, etc.
Microporous membrane pleated filter cartridge main features: High interception rate, high liquidity, low pressure differential and a wide range of chemical compatibility;
The production process adopts unique hot melting process technology, no any adhesive,
no foreign body release.
It can meet the food,beverage, beer, chemical, pharmaceutical and other industries production
requirements.

Filtration medium	PP / PTFE / PVDF / PES / Nylon
Up & Bottom flow support layer material	Polypropylene
Support frame & Structural Components	Polypropylene
Filtration precision	0.1-100um
Length	5",10",20",30",40",50",60"
Sealing material	Silicone rubber,Nitrile butadiene rubber, EPDM,Fluorine rubber.
Sealing method	Hot melting welding
Effect filtration area	≥0.6 m/10"
Filter cartridge diameter	69.0 mm
Maximum Working Temperature	80ºC,0.17 MPa
Highest Temperature	140ºC,0.27 MPa
Max positive differential pressure	0.42 MPa(25ºC)
Max back pressure differential pressure	0.28 MPa(25ºC)
Sterilization Conditions	121ºC 30 min
Application Field	Chemical Industry: Organic solvents, various of alcohols, Chemical reagents filtration,Sterile storage tank breathing apparatus, such

Specifications

aterial of Construction	Filter Media	Hydrophilic Polyethersulfone
	Support Layers	Polypropylene
	Micron Rating	0.1,0.2,0.45μm
	Inner Core	Reinforced Polypropylene
	Outer cage, End Cap	Reinforced Polypropylene
	Seal Method	Thermal Bonded, No Adhesives
	O-ring/Gaskets	EPDM, Silicone, Buna, Viton
Cartridge Dimensions	Outer Diameter	69mm (2.75")
	Inner Diameter	28mm (1.10")
	Length(Based on DOE END Cap)	5", 10", 20", 30", 40"
	Filtration Area (m2)	0.65m2 per 10"
Operating Conditions	Normal Operating Temp.	Up to 65ºC (140ºF )
	Max. Operating Temp.	85ºC(185ºF) at P<1.0 bar (14.5 psi)
	Forward Flow Direction	4.8 bar (70psi) at 25ºC (77ºF)
	Reverse Flow Direction	2.7 bar (40psi) at 25ºC (77ºF)
	PH Value Compatibility	2-13
	Sterilization Temp. Time	Steam Sterilization for 30minutes at 121+_2ºC, 100 cycles, Cumulative time: 8
Cartridage Safety	Endotoxin	<0.25 EU/ml
Cartridage Safety	Extractables	0.03g/10"

Application:

1. Micro-filtration in ultrapure water system

2. Beverage, wine, draft beer and other drinks

3. Plating solutions

4. Pharmaceutics

5. Chemical industry

6. Photoelectric industry

Polypropylene microporous membrane filter
Using the polypropylene composite membrane filter as the filtration material,
this filter is a kind of advanced and fixed type deep filtration filter cartridges,
the filtration micron is from 0.1um to 60um. The filtration membrane is not affected
by feed water pressure. Its unique advantages for low pressure differential, high flux,
good filtration precision, and low economic cost, it is favored by the users.

Hydrophobic PTFE filter
The filter medium is Hydrophobic PTFE microporous membrane filter: Strong hydrophobicity,
High holding rate, excellent chemical resistance and thermal stability, good strength,
impact resistance of the forward & reverse pressure.

Hydrophilic PTFE filter
The filter element medium for hydrphilic PTFE microporous membrane filter: The hydrophilic
stability, high entrapment rate, excellent chemical resistance thermal stability, good strength,
impact resistance of the forward & reverse pressure.

Polyether Sulphone Filter
The filter element is advanced in the world, the PES membrane micro opening rate is more than
80%, it has the unique microporous geometry type, it improves the filter cartridge filtration
efficiency and liquidity of the difficult solution. It is composed by PES membrane and the
polypropylene support material hot melting, it is no dung, also applicable for the strict chemical
and pharmaceutical industries.
The main features: Unique hydrophilic,not included the activated surfactant and surface
lubricant, it is provided high level filtration precision and flow rate for the filtration liquid.
It is applicable for wide PH range, low adsorption for the protein and the valuave heavy metal
biological, high entrapment rate, excellent chemical resistance and thermal stability,
good strength, impact resistance of the forward & reverse pressure.

Nylon filter
The filter medium is hydrophilic nylon microporous membrane filter, It is composed by nylon
membrane and the polypropylene support material hot melting, it is no dung, also applicable
for the strict chemical and pharmaceutical industries.
Main features:Hydrophilic stability, strong flexibility, high entrapment rate, excellent chemical
resistance, especially suitable for filtering of the organic solvent. Forward and reverse pressure
shock resistance.

Connection type

If you are intereated in our PP pleated filter cartridge or have any questions, please feel free to contact me.