5 Micron PP Sediment Filter

China 5 Micron PP Sediment Filter, Find details about China PP Filter, Sediment Filter from 5 Micron PP Sediment Filter

Transport Package
Carton
Specification
10"
Origin
China
Transport Package
Carton
Specification
10"
Origin
China
10" PP Melt Blown Filter Cartridge/ pp spun cartridge/ pp filter cartridge
1.Brief introduction and Technical Specification
 
Frotec high performance PP Melt Blown Filter Cartridges are constructed from high-tech and precisely automatic controlled machines. The cartridges are 100% made of FDA grade polypropylene resin which is ideal for most general filtration requirements. The fiber matrix of the filter cartridge has been engineered to provide structural integrity throughout the long service life and stable pressure drop. Excellent character of non-fiber releasing provides optimum fluid purity and eliminates foaming.
 
*100% polypropylene construction provides excellent chemical compatibility with a variety of process fluids and applications.
*Graded pore construction provides optimum particle retention and prevents media migration, ensuring consistent filtration performance.
Free of binders, additives and lubricants.
*Low pressure drop, high dirt holding capacity and long service life.
*Manufactured by FDA grade polypropylene resin.

 
TypeMelt-Blown Filter Cartridges
Filter MediaPolypropylene
Nominal Length10'',20'',30'',40''
Micron Rating1, 5, 10, 25, 50, 75, 100 μm
End CapDOE, 2-222 Flat, 2-222 Fin, 2-226 Flat, 2-226 Fin
Operating Conditions3.0 bar at 21ºC, 2.0 bar at 40ºC, 1.0 bar at 60ºC
ApplicationsPlating Solutions, Pre RO/DI, Chemicals, Petrochemical Process, Food & Beverage, Electronics
 
 
 
 
 
 
 
Material of construction
Filter media Polypropylene
Support layersPolypropylene
Micron rating0.1,0.2,0.45,0.65,1.0,2.0,3.0,5.0,10,30,50,70,100 um
Inner corePolypropylene
outer cage, end capePolypropylene
Seal methodThermal bonded, no adhesives
O-ring/GasketsEPDM, slicone, buna, viton
 
 
 
Cartridge dimensions
Outer diameter69mm
Inner diameter28 mm
Length (based on DOE end Cap)10''-254mm,20''-508mm
30''-762mm,40''-1016mm
Filtration Area0.65m2 per 10 ''
 
 
 
 
 
Operating conditions
Normal operating temperatureUp to 65 ºC
Max.operating temperature 90 ºC at p ≤1.0 bar
Forward flow direction4.2 bar at 25 ºC
Reverse flow direction2.1 bar at 25 ºC
Ph value compatibility1-14
Sterilization temperature timeSteam sterilization for 30 minutes at 121 ºC,100 cycle, autoclave 30 minutes
 
Cartridge safety
Endotoxin<0.25 EU/ml
Extractables0.03g/10''
Specification of pp spun washable water filter 
Material of Construction
• Filter Media: Polypropylene
• Core: Polypropylene or not
• Seal Material:Silicone,EDPM,Buna,Viton,
• Micron Rating: 1µm, 3µm, 5µm, .. 100µm
 
Dimensions Industrial PP melt blown filter cartridge:
• Outside diameter: 2.5" (62-65mm),4.5"(110-115mm)
• Inside diameter:28mm or 30''
• Length: 5", 10", 20", 30", 40"
 
Recommended Operating Conditions
Max. Operating Temperature: 80°C
Max. Differential Pressure: 2.0 bar @ 21°C
 
Ordering guide of PP melt blown filter cartridge:
Model PPFSupport
Cor
DimensionMicron
Rating
End AdaptorSealLength
Inch
PPF-A
Standard
PPF-B
Thin groove
PPF-C
Broad groove
P- PP
N- None
A- ID28mm
OD2.5"
B-ID28mm
OD4.5"
C- ID30mm
OD2.5"
D-customize
1:1μm
3:3μm
5:5μm
10:10μm
........
........
100:100
μm
0-DOE
1 - 226/Fin
2 - 222/Fin
3- 222/Flat closed
E-EPDM
N-Buna
S-Silicone
V-Vito
5: 5"
10: 10"
20: 20"
30: 30"
40: 40"
50:50"
  
5 Micron PP Sediment Filter