10kw-1mw 2mw 3mw gas generator set

Company Introduction

Since 2008

Factory area over 40000m2

Starff over 260 employees

Technicians over 100 people

10kw-1MW 2MW 3MW Gas Generator Set

High Configuration

Ignition system: ALTRONIC(USA)

Starting system: DC24V electric motor.

Mixer: IMPCO(USA)

Sparking plug:STITT

Engine Control System: Woodward(USA), HEINZMANN(Germany)

Electric Control System: ComAp(Czech), Deepsea(UK)

Alternator: Siemens, LEROY-SOMER, Marathon

10kw-1MW 2MW 3MW Gas Generator Set

a. Biomass exists in various forms, like wood, crop( straws of rice, wheat, bean, cotton, husk,etc), weeds, algae, etc, in the plants. Others like animal wastes spoil and the organic exist in waste water and rubbish etc.

Now there are mainly three ways to generate power with biomass: gasify generating, burning generating, CHP technology. In China, we are rich in the resources of biomass, but lack in the power supply. So our country can supply a vast stage to show the advantage and economy to generate power with biomass.

Shandong Lvhuan Power Equipment Co.,Ltd is a pioneer and practitioner in green energy and renewable resources.

b. Biomass is biological material derived from living, or recently living organisms. It most often refers to plants or plant-based materials which are specifically called lignocellulosic biomass. As an energy source, biomass can be used directly via combustion to produce heat. It is a renewable energy source, For the use of the term in ecology.

Shandong Lvhuan Power Equipment Co.,Ltd is a pioneer and practitioner in green energy and renewable resources.

10kw-1MW 2MW 3MW Gas Generator Set
Main composition of biomass gas:

After being gasified, the basis of gas is CO(20%), H2(9%), CH4(12%),CO2(12%), N2(52%), The lower heating value is 5-6 MJ/Nm3.

Efficiency of gasification:1 kg dried material can generate 2 Nm3 gas, conversation rate is more than 85%. 1 kg dry material can generate 1 kw.h power.

10kw-1MW 2MW 3MW Gas Generator Set
Requirements for biomass gas:

Within 1m from pressure regulating value of gas intake;

Gas temperature<40ºC

The ratio of CH4 in natural gas >70%;

Pressure of natural gas: 3--10 kpa, rate of pressure change <1 kpa/min;

H2S≤200mg/Nm3;

NH3≤20mg/Nm3;

Tar content≤20mg/ Nm3;

Moisture content ≤40g/Nm3;

Impurity particle size ≤5µm, impurity content ≤30 mg/Nm3

Heat value≥4.2MJ/Nm3

10kw-1MW 2MW 3MW Gas Generator Set

Service 
 
1.pre-sale service:
(1)We will send our engineer to prospect the site of power station free to charge.
 
(2)According to the situation of site we can supply you many drawings:like power station floor plan,
engineering flow sheet of circle cooling system,genset installation,genset foundation,electrical connection and some other techincal support etc.
 
2.Sale service:
(1)we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.
 
(2)We will debug the generator set till it can generate power successfully.
 
(3)We will also supply a technical training to the operators.Orcan send your staff to our company.We can train you till you can operate the generator set.
 
3.After-sale service:
(1)Our every engineers are in charge of different area,we will response periodically and support you 
technical service free of charge,
 
(2)For the quality problem, we will service for you free of charge during the guarantee period.
 
(3)One year guarantee period and lifetime service.
 
(4)we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.
 

FAQ:
1.How to choose the right model? 
A: It depends on real output power, Voltage, Frequency and gas type.  
2.What is the oil consumption and capacity per hour? 
A: 1.0-1.63g of lubricant oil consumption per hour. 1.0 Cubic meter gas can produce 1.5-3.0kw/h power. The capacity depends on gas energy. E.g 1.0 Cubic meter natural gas produce about 3.0kw/h  
3.What is the overhaul? 
  A: About 30000 working hours. A week is enough to finish.  
4. What is the warranty? 
    A: 1 year. Inside this 1 year, we offer all spare parts free of charge. After this period, spare      parts are not free. But, a set of spare parts will be shipped together with machine free.  
5. How is the service? 
A: We offer installation,repair and maintain service abroad. And online guide service if needed anytime. Our before-sale, in-sale and after-sale service are all trustable, you can name it.