Wear Resistance Steel Plates drilling Nm450 Wear Resistance Steel Plates Sheets From China Supplier abrasion steel colis welding, Find details about China Weld 700 Steel Plate, Weld 800 Steel Plate from Wear Resistance Steel Plates drilling Nm450 Wear Resistance Steel Plates Sheets From China Supplier abrasion steel colis welding
In addition, we can also perform flame cutting if necessary, as well as a wide range of other post-cutting services, including stress relieving, bending, drilling, and wash grinding.NM500 ABRASION STEEL PLATE is available in plate thicknesses of 4 - 160 mm and Weld700 F is available in plate thicknesses of 4 - 130 mm. Both grades are available in widths up to 3350 mm and lengths up to 14630 mm. For thicknesses over 100 mm preferred width is 1650 mm with untrimmed edge. We Export to Saudi Arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Japan, Australia, UAE, France, Azerbaijan, Ghana, Germany, Indonesia & Bahrain, Kazakhstan, Greece, Singapore, Thailand, Indonesia.
Steel Grade | C | Si | Mn | P | S | Cr | Mo | Ni | Ti |
NM300/AR300 | 0.23 | 0.70 | 1.60 | 0.025 | 0.015 | 0.70 | 0.40 | 0.50 | 0.050 |
NM360/AR360 | 0.25 | 0.70 | 1.60 | 0.025 | 0.015 | 0.80 | 0.50 | 0.50 | 0.050 |
NM400/AR400 | 0.30 | 0.70 | 1.60 | 0.025 | 0.010 | 1.00 | 0.50 | 0.70 | 0.050 |
NM450/AR450 | 0.35 | 0.70 | 1.70 | 0.025 | 0.010 | 1.10 | 0.55 | 0.80 | 0.050 |
NM500/AR500 | 0.38 | 0.70 | 1.70 | 0.020 | 0.010 | 1.20 | 0.65 | 1.00 | 0.050 |
NM550/AR550 | 0.38 | 0.70 | 1.70 | 0.020 | 0.010 | 1.20 | 0.70 | 1.00 | 0.050 |
NM600/AR600 | 0.38 | 0.70 | 1.90 | 0.020 | 0.010 | 1.50 | 0.70 | 1.00 | 0.050 |
Steel Grade | Tensile/Mpa | Elongation/% | Hardness/HBW | -20ºC Impact energy Akv/J |
NM300/AR300 | >1000 | >14 | 270-330 | >24 |
NM360/AR360 | >1100 | >12 | 330-390 | >24 |
NM400/AR400 | >1200 | >10 | 370-430 | >24 |
NM450/AR450 | >1250 | >7 | 420-480 | >24 |
NM500/AR500 | - | - | 480-525 | >24 |
NM550/AR550 | - | - | >530 | - |
NM600/AR600 | - | - | >570 | - |
C *) Max % | Si *) Max % | Mn *) Max % | P Max % | S Max % | Cr *) Max % | Cu *) Max % | Ni *) Max % | Mo *) Max % | B *) Max % |
---|---|---|---|---|---|---|---|---|---|
0.20 | 0.60 | 1.60 | 0.020 | 0.010 | 0.70 | 0.30 | 2.0 | 0.70 | 0.005 |
Thickness mm | Yield strength 1) Rp 0.2, min MPa | Tensile strength 1) Rm MPa | Elongation A5 min % | Typical hardness HBW |
---|---|---|---|---|
4 - 53 | 700 | 780 - 930 | 14 | 260 - 310 |
(53) - 100 | 650 | 780 - 930 | 14 | 260 - 310 |
(100) - 160 | 650 | 710 - 900 | 14 | 240 - 290 |