DYTPg Parallel fixed electro - hydraulic putter

Introduction:
DYTP series of electro-hydraulic putter for reciprocating push, pull straight (or reciprocating rotation of a
certain angle) movement, can be used to rise, drop or clamp the work of the place, can also be used for long-
distance and high-altitude dangerous areas, and computer Networked for centralized (program) control. It is
widely used in metallurgy, mining, coal, electricity, machinery, food, cement, chemical industry, water
conservancy, transportation, transportation, port, military equipment and other industries, is an indispensable
general power source. This product has the following advantages compared with the electric push rod cylinder
hydraulic cylinder:

1, electro-hydraulic putter can start with the load, and electric putter is very difficult.

2, the same electro-hydraulic putter in its rated push and pull range, the push and pull can be stepless
    adjustment, which has a wide range of driving force, and the electric putter and cylinder can not be done.

3, in the thrust and speed the same circumstances, the electro-hydraulic putter power consumption is electric
    putter and electric actuators half.

4, electro-hydraulic putter with full hydraulic drive, action sensitive, smooth operation, with effective mitigation of
    external impact, stroke control accuracy, cylinder, electric putter and electric actuator can not do.

5, electro-hydraulic putter with machine, electro-hydraulic integration of closed structure, the work of oil
    circulation in the pressure of the cylinder, small size, no oil, easy installation and maintenance. In the harsh
    environment of anti-dust, anti-water, the internal non-corrosive, life than the cylinder, electric putter, electric
    actuator for a long time.

6, small investment. Cylinders need to build expensive air compressor station, air pressure pipe leakage, air
    pressure instability, high noise; hydraulic cylinder to be established pump station, and electro-hydraulic putter
    simply turn on the power can be used.

The working principle

1, electro-hydraulic putter is a mechanical and electrical integration of closed structure, which to the
    implementing agencies, control agencies and pressure pumps. Motor oil pump, hydraulic control valves and
    hydraulic cylinders can be mounted on the same axis, can also be installed on different axes as needed.
    Connected to the motor power supply, by controlling the motor reversing the two-way pump output pressure
    oil, the hydraulic control valve sent to the cylinder to achieve the reciprocating motion of the cylinder piston
    rod.

2, the hydraulic control valve group mainly by the relief valve, control valve, hydraulic check valve, etc., can
    also be based on the working characteristics of electro-hydraulic putter, the design of different functions of
    the oil combination valve to meet their work requirements. General introduction of self-locking, pull back from
    the lock and push-pull are self-locking; speed adjustable and non-adjustable type; the overall putter has a
    horizontal use, up to use, down use.

Order Note: Electro-hydraulic putter mainly by the putter installation form, the motor protection rating, rated
output power, travel, speed and use of angle, the six elements. Users can also support the special requirements
of three regulatory functions. Namely: speed adjustment, stroke adjustment (limit switch position). In addition to
these three regulatory functions must be specified when ordering. Other Please refer to the model preparation
method, fill in the six basic requirements.

Structure:

1, Base 2, Coupling 3, Pump base 4, Pump 5, Fuel tank 6, Manifold block 7, Inspection mouth 8, Air filter 9,
Cylinder base 10, Throttle valve 11, Locking circle nut 12 Cold 13 live cold ring 14, cylinder body 15, guide
sleeve 16, cylinder head nut 17, dust cover 18, tighten the nut 19, connecting fork